Section 12 (Automatic Transaxle System Diagnosis - 1.6L T)
WARNING: This page is about a different variant/trim than selected.
- DTC Index
- DTC P0601-41: Internal Control Module Memory Check Sum Error
- DTC P0601-47: Functional Safety Level 3 S/W Fail
- DTC P0601-48: Functional Safety Level 2 S/W Fail
- DTC P06B0-11: Odd Sensor Supply Short To Ground
- DTC P06B3-11: Even Sensor Supply Short To Ground
- DTC P0705-29: Inhibitor Switch Invalid Code
- DTC P0705-64: Inhibitor Switch Unused Code
- DTC P0715-12: Input Speed Sensor 1 Short To Battery
- DTC P0715-14: Input Speed Sensor 1 Short To Ground/Open
- DTC P0716-03: Input Speed Sensor 1 Circuit Range/Performance (Invalid Pulse Width)
- DTC P0716-31: Input Speed Sensor 1 Circuit Range/Performance (No Pulse)
- DTC P073E-07: Gear Dropout Reverse Gear
- DTC P073E-71: Unable To Engage (Select) Reverse Gear
- DTC P073E-73: Unable To Engage (Shift) Reverse Gear
- DTC P073E-77: Unable To Disengage (Shift) Reverse Gear
- DTC P073F-07: Gear Dropout Gear 1
- DTC P073F-71: Unable To Engage (Select) Gear 1
- DTC P073F-73: Unable To Engage (Shift) Gear 1
- DTC P073F-77: Unable To Disengage (Shift) Gear 1
- DTC P074A-07: Gear Dropout Gear 2
- DTC P074A-71: Unable To Engage (Select) Gear 2
- DTC P074A-73: Unable To Engage (Shift) Gear 2
- DTC P074A-77: Unable To Disengage (Shift) Gear 2
- DTC P074B-07: Gear Dropout Gear 3
- DTC P074B-71: Unable To Engage (Select) Gear 3
- DTC P074B-73: Unable to Engage (Shift) Gear 3
- DTC P074B-77: Unable To Disengage (Shift) Gear 3
- DTC P074C-07: Gear Dropout Gear 4
- DTC P074C-71: Unable To Engage (Select) Gear 4
- DTC P074C-73: Unable To Engage (Shift) Gear 4
- DTC P074C-77: Unable To Disengage (Shift) Gear 4
- DTC P074D-07: Gear Dropout Gear 5
- DTC P074D-71: Unable To Engage (Select) Gear 5
- DTC P074D-73: Unable To Engage (Shift) Gear 5
- DTC P074D-77: Unable To Disengage (Shift) Gear 5
- DTC P074E-07: Gear Dropout Gear 6
- DTC P074E-71: Unable to Engage (Select) Gear 6
- DTC P074E-73: Unable To Engage (Shift) Gear 6
- DTC P074E-77: Unable To Disengage (Shift) Gear 6
- DTC P074F-07: Gear Dropout Gear 7
- DTC P074F-71: Unable to Engage (Select) Gear 7
- DTC P074F-73: Unable to Engage (Shift) Gear 7
- DTC P074F-77: Unable to Disengage (Shift) Gear 7
- DTC P0805-64: Clutch 1 Motor Hall Sensor circuit
- DTC P0820-08: TGS Lever Complement Value
- DTC P0820-16: TGS Lever Under Voltage
- DTC P0820-17: TGS Lever Over Voltage
- DTC P0820-1C: TGS Lever Voltage Out Of Range
- DTC P087A-64: Clutch 2 Motor Hall Sensor Circuit
- DTC P0880-1C: TCM Power Input
- DTC P0900-01: Clutch 1 Motor U/V/W Circuit
- DTC P0901-71: Clutch 1 System Actuator Stuck
- DTC P0901-73: Clutch 1 System System Stuck Off
- DTC P0901-78: Clutch 1 System Reference Position Failure
- DTC P0904-12: Select 1 Position Sensor Short to Battery
- DTC P0904-14: Select 1 Position Sensor Short to Ground/Open
- DTC P090A-01: Clutch 2 Motor U/V/W Circuit
- DTC P090B-71: Clutch 2 System Actuator Stuck
- DTC P090B-73: Clutch 2 System System Stuck Off
- DTC P090B-78: Clutch 2 System Reference Position Failure
- DTC P0910-11: Select 1 Solenoid Push/Pull Short to Ground
- DTC P0910-12: Select 1 Solenoid Push/Pull Short to Battery
- DTC P0910-13: Select 1 Solenoid Push/Pull Open
- DTC P0910-15: Select 1 Solenoid LSD Short to Battery
- DTC P0914-64: Shift 1 Motor Hall Sensor Circuit
- DTC P0920-01: Shift 1 Motor U/V/W Circuit
- DTC P0921-77: Gear 1 System Referencing Failure
- DTC P0921-98: Gear 1 System Motor Thermal Damage
- DTC P0955-29: Manual Mode Switch
- DTC P17C0-00: DCT None-EOL
- DTC P1904-12: Select 2 Position Sensor Short To Battery
- DTC P1904-14: Select 2 Position Sensor Short To Ground/Open
- DTC P1910-11: Select 2 Solenoid Push/Pull Short To Ground
- DTC P1910-12: Select 2 Solenoid Push/Pull Short to Battery
- DTC P1910-13: Select 2 Solenoid Push/Pull Open
- DTC P1910-15: Select 2 Solenoid LSD Short To Battery
- DTC P1914-64: Shift 2 Motor Hall Sensor Circuit
- DTC P1920-01: Shift 2 Motor U/V/W Circuit
- DTC P1921-77: Gear 2 System Referencing Failure
- DTC P1921-98: Gear 2 System Motor Thermal Damage
- DTC P2765-12: Input Speed Sensor 2 Short To Battery
- DTC P2765-14: Input Speed Sensor 2 Short To Ground/Open
- DTC P2766-03: Input Speed Sensor 2 Circuit Range/Performance (Invalid Pulse Width)
- DTC P2766-31: Input Speed Sensor 2 Circuit Range/Performance (No Pulse)
- DTC U0001-88: CAN Communication Bus Off
- DTC U0100-87: Lost Communication With ECM/PCM
- DTC U0121-87: Lost Communication With Anti-Lock Brake System (ABS) Control Module
- DTC U1100-87: High Speed CAN2 Lost Communication (EMS-DCT)
- DTC U1103-41: Check Sum Error With TGS Lever
- DTC U1103-82: TGS Lever Alive Counter Error
- DTC U1103-87: Lost Communication With TGS Lever
- DTC U1117-88: High Speed CAN2 Communication (EMS-DCT)