Inspection Mode 6
| DTC | Item | Note |
|---|---|---|
| B2784 | ANTENNA CIRCUIT (PUSH ENGINE SWITCH) | - |
| B278A | PUSH ENGINE SWITCH POWER SUPPLY CIRCUIT | - |
Diagnostic procedure:
- Prepare for the inspection mode. <Ref. to PREPARATION FOR THE INSPECTION MODE , PROCEDURE, Inspection Mode.>
- Hold the access key that doesn't have a battery over the push button start SW for collation.
- Read the DTC and check that the DTC is not displayed. <Ref. to READ DIAGNOSTIC TROUBLE CODE (DTC) .>
NOTE:
If the DTC is displayed on the screen, the trouble is still present. Perform the diagnosis for the displayed DTCs.