Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Subaru >> 2017 >> WRX Base >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Security And Locks - Keyless Access (W/ Push Button Start) (Diagnostics) >> Inspection Mode >> Procedure >> Preparation For The Inspection Mode

Preparation For The Inspection Mode

  1. Check that the battery voltage is 12 V or more and fuel remains approx. half [20 - 40 L (5.3 - 10.6 US gal, 4.4 - 8.8 Imp gal)].
  2. Perform the Clear Memory Mode. <Ref. to CLEAR MEMORY MODE .>
  3. Read the DTC and check that the DTC is not displayed. <Ref. to READ DIAGNOSTIC TROUBLE CODE (DTC) .>
NOTE: If the DTC is displayed on the screen, the trouble is still present. Perform the diagnosis for the displayed DTCs. After solving the DTC, repeat from step  2.
scientia non olet · About Mike's Workshop Manuals