Inspection Mode 2
| DTC | Item | Note |
|---|---|---|
| B1242 | WIRELESS TUNER | - |
Diagnostic procedure:
- Prepare for the inspection mode. <Ref. to PREPARATION FOR THE INSPECTION MODE , PROCEDURE, Inspection Mode.>
- Turn the ignition switch to OFF and then leave it for 10 seconds or more.
- Read the DTC and check that the DTC is not displayed. <Ref. to READ DIAGNOSTIC TROUBLE CODE (DTC) .>
NOTE:
If the DTC is displayed on the screen, the trouble is still present. Perform the diagnosis for the displayed DTCs.