Circuit/System Verification

WARNING: This page is about a different car, the 2007 Saturn Outlook. However, it is still accessible from the selected car via links, so may be relevant.

Ignition ON, doors unlocked, transaxle in Park, disable the power liftgate by pressing the Liftgate Enable/Disable button on the I/P Switch Assembly.
Open the liftgate by pressing the touchpad on the liftgate handle switch and close by pushing the liftgate closed. The liftgate should release, cinch-in and latch.
- If the liftgate fails to release, cinch-in or latch, refer to Latch Assembly Malfunction .
Enable the liftgate by pressing the Enable/Disable button on the I/P Switch Assembly and command the liftgate to OPEN and CLOSE with a scan tool. The liftgate should OPEN and CLOSE as commanded.
- If the liftgate fails to OPEN and CLOSE, refer to Power Liftgate Inoperative .
- If the liftgate closes and immediately reopens, refer to Liftgate Closes and Reopens .
Command the Power Liftgate to OPEN and CLOSE by pressing the I/P Switch Assembly, the liftgate should OPEN and CLOSE as commanded.
- If the liftgate does not OPEN and CLOSE as commanded, refer to I/P Switch Inoperative .
Command the Power Liftgate to OPEN by pressing the touchpad on the Liftgate Handle, the liftgate should OPEN as commanded.
- If the liftgate does not OPEN as commanded, refer to Liftgate Handle Switch Inoperative .
Command the Power Liftgate to Close by pressing the liftgate button next to the liftgate latch, the liftgate should CLOSE as commanded.
- If the liftgate does not CLOSE as commanded, refer to Liftgate Button Switch Inoperative .