Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Nissan-Datsun >> 2016 >> Versa Note SL >> Repair and Diagnosis >> External Pages >> Different car >> Section 42 (Power Control System (Power Distribution System)) >> Symptom Diagnosis >> Push-Button Ignition Switch Does Not Operate >> Diagnosis Procedure >> Diagnostic Test

Diagnostic Test

WARNING: This page is about a different car, the 2016 Nissan Versa. However, it is still accessible from the selected car via links, so may be relevant.

  1. PERFORM WORK SUPPORT

    Perform "INSIDE ANT DIAGNOSIS" on "Work support" of "INTELLIGENT KEY".

    Refer to CONSULT FUNCTION (BCM - INTELLIGENT KEY) .

    GO TO STEP 2  .

  2. PERFORM SELF DIAGNOSTIC RESULT

    Perform "Self Diagnostic Result" of "BCM".

    Is DTC detected?

    YES 

    Refer to DTC INDEX .

    NO 

    GO TO STEP 3  .

  3. CHECK PUSH-BUTTON IGNITION SWITCH

    Check push-button ignition switch.

    Refer to COMPONENT FUNCTION CHECK .

    Is the operation normal?

    YES 

    GO TO STEP 4  .

    NO 

    Repair or replace malfunctioning parts.

  4. CONFIRM THE OPERATION

    Confirm the operation again.

    Is the inspection normal?

    YES 

    Check intermittent incident. Refer to INTERMITTENT INCIDENT .

    NO 

    GO TO STEP   1  .

scientia non olet · About Mike's Workshop Manuals