Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Nissan-Datsun >> 2016 >> Versa Note SL >> Repair and Diagnosis >> External Pages >> Different car >> Section 41 (Power Control System (Power Distribution System) (DTC/Circuit Diagnosis)) >> DTC/Circuit Diagnosis >> Push-Button Ignition Switch >> Component Function Check

Component Function Check

WARNING: This page is about a different car, the 2016 Nissan Versa. However, it is still accessible from the selected car via links, so may be relevant.

  1. CHECK FUNCTION

    1. Select "PUSH SW" in "Data Monitor" of "BCM" using CONSULT.
    2. Check the push-button ignition switch signal under the following conditions.
    Test item Condition Status
    PUSH SW Push-button ignition switch is pressed On
    Push-button ignition switch is not pressed Off

    Is the indication normal?

    YES 

    Inspection End.

    NO 

    Go to DIAGNOSIS PROCEDURE .

scientia non olet · About Mike's Workshop Manuals