Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Nissan-Datsun >> 2012 >> Murano SL, AWD >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System - DTCS P0137 To P0445 (Except CROSSCABRIOLET) >> DTC P0196: EOT Sensor >> Component Inspection

Component Inspection

  1. CHECK ENGINE OIL TEMPERATURE SENSOR
    1. Turn ignition switch OFF.
    2. Disconnect engine oil temperature sensor harness connector.
    3. Remove engine oil temperature sensor. Refer to "EXPLODED VIEW ".
    4. Check resistance between engine oil temperature sensor terminals by heating with hot water as shown in the figure.
    Terminals Condition Resistance
    1 and 2 Temperature [°C (°F)] 20 (68) 2.1 - 2.9 kΩ
    50 (122) 0.68 - 1.00 kΩ
    90 (194) 0.236 - 0.260 kΩ
    Fig 1: Checking Resistance Between EOT Sensor Terminals
    G08479217Courtesy of NISSAN NORTH AMERICA, INC.

    Is the inspection result normal? 

    YES: INSPECTION END

    NO: Replace engine oil temperature sensor. Refer to "EXPLODED VIEW ".

scientia non olet · About Mike's Workshop Manuals