Symptom Chart
SYMPTOM CHART
| SYMPTOM | INSPECTION PROCEDURE NO. | REFERENCE PAGE |
|---|---|---|
| Scan tool cannot communicate only with ABS/TCL-ECU. | - | DIAGNOSTIC TROUBLE CODE CHART |
| When the ignition switch is turned to the "ON" position (engine stopped), the "TCL OFF" indicator light dose not illuminate. | 1 | SYMPTOM PROCEDURES |
| When the ignition switch is turned to the "ON" position (engine stopped), the TCL work indicator light dose not illuminate. | 2 | |
| The "TCL OFF" indicator light remains illuminated after the engine is started. | 3 | |
| The TCL work indicator light remains illuminated after the engine is started. | 4 | |
| When the TCL switch is push on, TCL does not be cancelled. | 5 | INSPECTION PROCEDURE 5: WHEN THE TCL SWITCH IS PUSH ON, TCL DOSE NOT BE CANCELLED |
| TCL dose not operate. | 6 | INSPECTION PROCEDURE 6: TCL DOES NOT OPERATE |