Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Mitsubishi >> 2009 >> Galant ES >> Repair and Diagnosis >> Brakes >> Traction Control >> Traction Control System (TCL) - 2009.5 >> On-Vehicle Service >> TCL Switch Check

TCL Switch Check

  1. Remove the TCL switch (Refer to REMOVAL AND INSTALLATION ).
  2. Measure the resistance between terminal 1 and terminal 2 when the TCL switch is pressed or released. If the values measured at the time correspond to those in the table below, the resistance values are correct.
SWITCH POSITION

SWITCH POSITION TESTER CONNECTION SPECIFIED CONDITION
Pressed 1 - 2 Continuity (Less than 2 ohms)
Released 1 - 2 Open circuit
Fig 1: Identifying TCL Switch Connector
G06248518Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About Mike's Workshop Manuals