Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Mercury >> 1993 >> Villager LS >> Repair and Diagnosis >> Body & Frame >> Power Seats >> System Tests >> Power Seat System >> PS7: Check Ground At Driver Power Seat Switch

PS7: Check Ground At Driver Power Seat Switch

  1. Disconnect the driver power switch connector.
  2. Measure the resistance of the "BK" wire between the driver power seat switch connector and ground. See Figure .
  3. Is the resistance less than 5 ohms? If yes, go to PS8:Check Driver Power Seat Switch  . If no, service the "BK" wire.
scientia non olet · About Mike's Workshop Manuals