Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Mazda >> 2011 >> CX-9 Touring, 3.7 V, AWD >> Repair and Diagnosis >> Accessories & Equipment >> Memory Modules >> On-Board Diagnostic [Seat Position Memory Control System] >> DTC Inspection [Position Memory Control System]

DTC Inspection [Position Memory Control System]

  1. Connect the M-MDS to the DLC-2.
  2. After the vehicle is identified, select the following items from the initialization screen of the M-MDS.
    • When using the IDS (laptop PC)
      1. Select "Self Test".
      2. Select "Modules".
      3. Select "DSM".
    • When using the PDS (Pocket PC)
      1. Select "Module Tests".
      2. Select "DSM".
      3. Select "Self Test".
        Fig 1: Identifying Data Link Connector - 2 Location
        G04970771Courtesy of MAZDA MOTORS CORP.
  3. Verify the DTC according to the directions on the screen.
    • If any DTCs are displayed, perform troubleshooting according to the corresponding DTC inspection.
  4. After completion of repairs, clear all DTCs stored in the position memory control module. (See CLEARING DTC [POSITION MEMORY CONTROL SYSTEM] .)
scientia non olet · About Mike's Workshop Manuals