Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Mazda >> 2011 >> CX-9 Touring, 3.7 V, AWD >> Repair and Diagnosis >> Accessories & Equipment >> Memory Modules >> On-Board Diagnostic [Seat Position Memory Control System] >> Clearing DTC [Position Memory Control System]

Clearing DTC [Position Memory Control System]

  1. Connect the M-MDS to the DLC-2.
  2. After the vehicle is identified, select the following items from the initialization screen of the M-MDS.
    • When using the IDS (laptop PC)
      1. Select "Self Test".
      2. Select "Modules".
      3. Select "DSM".
    • When using the PDS (Pocket PC)
      1. Select "Module Tests".
      2. Select "DSM".
      3. Select "Self Test".
        Fig 1: Identifying Data Link Connector - 2 Location
        G04970667Courtesy of MAZDA MOTORS CORP.
  3. Verify the DTC according to the directions on the screen.
  4. Press the clear button on the DTC screen to clear the DTC.
  5. Turn the ignition switch to the LOCK position.
  6. Turn the ignition switch to the ON position and wait for 5 s  more.
  7. Perform DTC inspection. (See DTC INSPECTION [POSITION MEMORY CONTROL SYSTEM] .)
  8. Verify that no DTCs are displayed.
scientia non olet · About Mike's Workshop Manuals