Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Kia >> 2007 >> Magentis 2.4 3 >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transaxle System >> DTC P0707 Transaxle Range Switch - Low Input >> Terminal & Connector Inspection

Terminal & Connector Inspection

  1. Many malfunctions in the electrical system are caused by poor harness and terminals. Faults can also be caused by interference from other electrical systems, and mechanical or chemical damage.
  2. Thoroughly check connectors for looseness, poor connection, bending, corrosion, contamination, deterioration, or damage.
  3. Has a problem been found?

    YES  : --> Repair as necessary and go to "VERIFICATION OF VEHICLE REPAIR " procedure.

    no  : --> Go to "POWER CIRCUIT INSPECTION " procedure.

scientia non olet · About Mike's Workshop Manuals