Speed Control Sensor: Installation

All vehicles 

1. Install the speed control sensor retaining bracket.
   • Install the nuts.
     • Tighten to 5 N.m.
       Fig 1: Installing Speed Control Sensor Retaining Bracket

       Courtesy of JAGUAR CARS, INC.
2. Adjust the speed control sensor levelling bolt shoulder to mounting bracket clearance to 4.5 mm.
   Fig 2: Adjusting Speed Control Sensor Levelling Bolt

   Courtesy of JAGUAR CARS, INC.
3. Install the speed control sensor.
   • Tighten to 5 N.m.
     Fig 3: Installing Speed Control Sensor

     Courtesy of JAGUAR CARS, INC.
4. Connect the speed control sensor electrical connector.
   Fig 4: Connecting Speed Control Sensor Electrical Connector

   Courtesy of JAGUAR CARS, INC.
5. Connect the battery ground cable. For additional information, refer to BATTERY CONNECT .
6. Check and adjust the speed control sensor levelling. For additional information, refer to SPEED CONTROL MODULE ALIGNMENT - VIN Range: G00442->H18679 .

Vehicles built up to VIN:H18680 

7. Install the left-hand front bumper access cover.
   Fig 5: Installing Left-Hand Front Bumper Access Cover

   Courtesy of JAGUAR CARS, INC.

All vehicles 

8. Install the radiator splash shield. For additional information, refer to RADIATOR SPLASH SHIELD .
9. Initialize the system. For additional information, refer to the Jaguar approved diagnostic system.