Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Infiniti >> 2015 >> QX50 Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 67 (Power Window Control System (Hybrid)) >> Basic Inspection >> Additional Service When Removing 12V Battery Negative Terminal >> Work Procedure

Work Procedure

WARNING: This page is about a different car, the 2015 Infiniti Q70. However, it is still accessible from the selected car via links, so may be relevant.

  1. SYSTEM INITIALIZATION

    Perform system initialization. Refer to WORK PROCEDURE .

    GO TO STEP 2  .

  2. CHECK ANTI-PINCH FUNCTION

    Check anti-pinch function. Refer to WORK PROCEDURE .

    END

scientia non olet · About Mike's Workshop Manuals