Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Infiniti >> 2015 >> QX50 Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 67 (Power Window Control System (Hybrid)) >> Basic Inspection >> System Initialization >> Work Procedure

Work Procedure

WARNING: This page is about a different car, the 2015 Infiniti Q70. However, it is still accessible from the selected car via links, so may be relevant.

  1. STEP 1

    1. Turn ignition switch ON.
    2. Operate power window switch to fully open the window. (This operation is unnecessary if the window is already fully open)

    GO TO STEP 2  .

  2. STEP 2

    Continue pulling the power window switch UP (AUTO-UP operation). Even after glass stops at fully closed position, keep pulling the switch for 2 seconds or more.

    GO TO STEP 3  .

  3. STEP 3

    Check that auto-up function operates normally.

    GO TO STEP 4  .

  4. STEP 4

    Check anti-pinch function. Refer to WORK PROCEDURE .

    END

scientia non olet · About Mike's Workshop Manuals