Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Ford >> 2015 >> Transit-350 HD Base, Van Cargo Extended >> Repair and Diagnosis >> External Pages >> Different car >> Section 22 (MULTIFUNCTION Electronic Modules) >> Diagnosis And Testing >> Body Control Module (BCM) >> Pinpoint Tests >> Pinpoint Test K : DTC (Diagnostic Trouble Code) P0562:00 >> Notes

Pinpoint Test K : DTC (Diagnostic Trouble Code) P0562:00: Notes

WARNING: This page is about a different car, the 2016 Ford Transit-350 HD, 2016 Ford Transit-350, 2016 Ford Transit-250, and 2016 Ford Transit-150. However, it is still accessible from the selected car via links, so may be relevant.

Refer to Grounds for schematic and connector information.

Refer to Power Distribution for schematic and connector information.

Normal Operation and Fault Conditions 

The BCM receives voltage at all times from the high current BJB fuse 10 (60A) and fuse 11 (60A) and from the BJB fuse 16 (40A).

DTC Fault Trigger Conditions 

DTC Description Fault Trigger Conditions
P0562:00 System Voltage Low: No Sub Type Information A continuous memory DTC that sets in the BCM if the BCM detects lower than expected battery voltage on the voltage supply input circuits.

Possible Sources 

scientia non olet · About Mike's Workshop Manuals