Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chevrolet >> 2018 >> Silverado 1500 SSV, 4WD, Part Time T/Case Control, Gas >> Repair and Diagnosis >> Hybrid/Electric Powertrain >> Electric Converters and Controllers >> Hybrid/EV Controls System >> Repair Instructions >> Generator Control Module 3-Phase Cable Assembly Replacement >> Installation Procedure

Installation Procedure

    Fig 1: Generator Control Module 3 Phase Cable
    GM4371986Courtesy of GENERAL MOTORS COMPANY
  1. Generator Control Module 3 Phase Cable (2) - Install
  2. Loosely install the generator control module 3 phase cable mounting bolts. (1)
    3. Fig 2: Generator Control Module 3 Phase Cable Terminal Bolts
    GM4371987Courtesy of GENERAL MOTORS COMPANY
  3. Loosely install the generator control module 3 phase cable terminal bolts. (1)
    4. Fig 3: Generator Control Module 3 Phase Cable Mounting Bolt
    GM4371993Courtesy of GENERAL MOTORS COMPANY
    CAUTION:

    Refer to Fastener Caution

  4. Generator Control Module 3 Phase Cable Mounting Bolt (1) - Tighten to 9 N.m (80 lb in)
    5. Fig 4: Control Module 3 Phase Cable Bolt Tightening Sequence
    GM4371999Courtesy of GENERAL MOTORS COMPANY
  5. Tighten the bolts in the sequence shown to 8 N.m (71 lb in)
    6. Fig 5: Terminal Cover Seal And Dust Cover
    GM4372008Courtesy of GENERAL MOTORS COMPANY
  6. Terminal Cover Seal (2) - Install
  7. Dust Cover (1) - Install
    8. Fig 6: Cover And Bolts
    GM4372027Courtesy of GENERAL MOTORS COMPANY
  8. Cover (1) - Install
  9. Loosely install the cover bolts. (2)
    10. Fig 7: Heat Shield And Bolts
    GM4372033Courtesy of GENERAL MOTORS COMPANY
  10. Heat Shield (1) - Install
  11. Loosely install the heat shield bolts. (2)
    12. Fig 8: Cover And Heat Shield Bolt Tightening Sequence
    GM4372040Courtesy of GENERAL MOTORS COMPANY
  12. Tighten the bolts in the sequence shown to 9 N.m (80 lb in)
    13. Fig 9: Starter Generator Component Location
    GM4353331Courtesy of GENERAL MOTORS COMPANY
  13. Starter Generator (1) - Install - Starter Generator Replacement 
scientia non olet · About Mike's Workshop Manuals