Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chevrolet >> 2018 >> Silverado 1500 SSV, 4WD, Part Time T/Case Control, Gas >> Repair and Diagnosis >> Hybrid/Electric Powertrain >> Electric Converters and Controllers >> Hybrid/EV Controls System >> Repair Instructions >> Accessory DC Power Control Module Tray Replacement >> Installation Procedure

Installation Procedure

    Fig 1: Accessory DC Power Control Module Tray, Bolts And Nuts
    GM4598976Courtesy of GENERAL MOTORS COMPANY
  1. Accessory DC Power Control Module Tray (5) - Install
  2. Battery Negative Cable Extension Cable Strap (4) - Install (Qty: 2)
    3. CAUTION:

    Refer to Fastener Caution

  3. Accessory DC Power Control Module Nut (2) - Install and tighten (Qty: 2) to 9 N.m (80 lb in)
  4. Accessory DC Power Control Module Nut (3) - Install and tighten (Qty: 3) to 22 N.m (16 lb ft)
  5. Accessory DC Power Control Module Bolt (1) - Install and tighten (Qty: 2) to 9 N.m (80 lb in)
    6. Fig 2: Retainers
    GM4598975Courtesy of GENERAL MOTORS COMPANY
  6. Retainer (1) - Engage (Qty: 5)
    7. Fig 3: Retainers
    GM4598973Courtesy of GENERAL MOTORS COMPANY
  7. Retainer (1) - Engage (Qty: 5)
    8. Fig 4: Retainer
    GM4598972Courtesy of GENERAL MOTORS COMPANY
  8. Retainer (1) - Engage
  9. Install the generator control module. Generator Control Module Replacement 
  10. Install the battery. Battery Replacement
  11. Install the air cleaner assembly. Air Cleaner Assembly Replacement
scientia non olet · About Mike's Workshop Manuals