Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Cadillac >> 2017 >> CTS Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 142 (Fixed And MOVEABLE Window System) >> Repair Instructions >> Rear Window Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2016 Cadillac CTS. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the rear window into the opening. Refer to Adhesive Installation of Rear Windows .
  2. Connect the rear window defogger electrical connectors.
  3. Disconnect the radio antenna amplifier from the rear window. Refer to Radio Antenna Amplifier Replacement (Left Side) .
  4. Disconnect the radio antenna ground coil from the rear window. Refer to Radio Antenna Ground Coil Replacement .
  5. Disconnect the radio antenna coil from the rear window. Refer to Radio Antenna Coil Replacement .
  6. Connect the rear window radio antenna. Refer to Radio, Mobile Telephone and Vehicle Location Antenna Cable Replacement .
  7. Check the radio and OnStar® system to verify reception.
  8. Install the body side rear window garnish molding. Refer to Body Side Rear Window Garnish Molding Replacement .
  9. Close the rear compartment lid.
  10. Remove the double layer of masking tape around the perimeter of the painted surfaces and the interior trim.
scientia non olet · About Mike's Workshop Manuals