Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Cadillac >> 2017 >> CT6 Plug-In >> Repair and Diagnosis >> Body & Frame >> Frames, Subframes & Crossmembers >> Frame And Underbody >> Repair Instructions >> Front Wheelhouse Liner Replacement >> Installation Procedure

Installation Procedure

  1. Front Wheelhouse Liner (2)» Install
    Fig 1: Front Wheelhouse Liner
    GM4244635Courtesy of GENERAL MOTORS COMPANY
  2. Front Wheelhouse Liner Screw (1)» Install and tighten [5x] 2.5 N.m (22 lb in)
    CAUTION: Refer to Fastener Caution
  3. Front Wheelhouse Liner Screw (1)» Install and tighten [8x] 2.5 N.m (22 lb in)
    Fig 2: Front Wheelhouse Liner Screw
    GM4244631Courtesy of GENERAL MOTORS COMPANY
  4. Front Wheelhouse Liner Retainer (2)» Install
  5. Engine Front Splash Shield-Left Side (Front/Rear)» Install - Engine Front Splash Shield Replacement - Left Side (Rear) Engine Front Splash Shield Replacement - Left Side (Front)  or Engine Front Splash Shield-Right Side (Front/Rear)» Install - Engine Front Splash Shield Replacement - Right Side (Rear) Engine Front Splash Shield Replacement - Right Side (Front) 
  6. Install the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation
  7. Lower the vehicle.
scientia non olet · About Mike's Workshop Manuals