3.0L - Fuel Supply, Generic Scan Tool, Engine Codes: AVK, BGN

• Fuel Supply
  • Notes for performing work on fuel supply system
    • General Repair Notes:
    • Safety precautions when working on fuel supply
    • Rules of cleanliness
  • Fuel supply system - Front Wheel Drive (FWD)
    • Notes
    • Fuel tank with attachments - component overview
      • Notes
      • Installation position of Ground (GND) connection
    • Fuel Pump (FP) and Sender for fuel gauge - component overview
      • Notes
      • Releasing harness connector
    • Fuel pump, removing and installing
      • Notes
      • Recommended special tools and equipment
      • Empty fuel tank
      • Removing
      • Installing
      • Tightening torques
      • Final procedures
    • Fuel Pump (FP), electrical testing
      • Recommended special tools and equipment
      • Test requirements:
      • Test sequence
        • Notes
        • Sedan:
        • Avant:
        • All:
        • Final procedures
    • Supply quantity of Fuel Pump (FP), checking
      • Recommended special tools and equipment
      • Test requirements:
      • Test sequence
  • Fuel supply system - All Wheel Drive (AWD)
    • Notes
    • Fuel tank with attachments - component overview
      • Notes
      • Installation position of Ground (GND) connection
    • Fuel Pump (FP) and Sender for fuel gauge - component overview
      • Part I
      • Part II
        • Notes
        • Releasing harness connector
        • Installed position of connector flange for Fuel Level Sensor 2
      • Fuel pump, removing and installing
        • Notes
        • Recommended special tools and equipment
        • Empty fuel tank
        • Removing
        • Installing
        • Tightening torques
        • Final procedures
    • Fuel Pump (FP), electrical testing
      • Recommended special tools and equipment
      • Test requirements:
      • Test sequence
      • Final procedures
    • Supply quantity of Fuel Pump (FP), checking
      • Recommended special tools and equipment
      • Test requirements:
      • Test sequence
  • EVAP canister/leak detection system (Front and All Wheel Drives)
    • EVAP canister/leak detection system - component overview
    • EVAP canister, removing and installing
      • Notes
      • Installing
      • Tightening torques
    • Hose plan, EVAP canister system / Leak detection system
    • Evaporative Emissions (EVAP) system diagnostic leak test
      • Function
    • EVAP canister system, checking for proper seal
      • Notes
      • Test sequence
      • Checking fuel supply and ventilation systems for leaks
      • Front Wheel Drive (FWD) vehicles
        • Sedan:
        • Avant:
        • All Wheel Drive (AWD) vehicles
        • All:
      • Final procedures
    • Checking Evaporative Emission (EVAP) canister purge regulator valve -N80-
      • Recommended special tools and equipment
      • Test requirements:
      • Procedure
      • Checking internal resistance
      • Checking voltage supply
      • Check Ground (GND) activation
      • Final procedures
    • Leak Detection Pump (LDP) -V144-, checking
      • Recommended special tools and equipment
      • Test requirements:
      • Procedure
      • Checking internal resistance
      • Checking voltage supply
      • Checking wire connections
      • Final procedures
  • Engine Electronic Power Control (EPC) System
    • Function of EPC system
    • Accelerator linkage, servicing
      • Notes
      • Accelerator pedal module with Throttle Position (TP) sensor -G79- and Sender -2- for accelerator pedal position -G185-, removing and installing
        • Notes
        • Installing
        • Tightening torque
    • Throttle Position (TP) sensor, checking
      • Recommended special tools and equipment
      • Test requirement:
      • Procedure
      • Checking voltage supply
      • Checking wire connections
      • Final procedures