Diagnostic Trouble Code (DTC) Information ECM-U041864

Condition 

The anti-lock brake system module monitors the speed on the driven wheels and compares it with the actual vehicle speed. If the Brake Control Module (BCM) detects that the vehicle speed is greater than the speed at the drive wheels, the vehicle is considered to be skidding on the surface. To prevent skidding, the Brake Control Module (BCM) requests more torque to the drive wheels. The request is sent to the Engine Control Module (ECM) via CAN.

The Engine Control Module (ECM) checks the actual circumstances and evaluates the received signals before any torque increases are carried out.

The diagnostic trouble code (DTC) is stored if the control module detects that:

• The signal from the Brake control module (BCM) with the request about extra wheel torque is outside its permitted range regarding duration and torque amplitude.

The control module's test for the diagnostic trouble code (DTC) starts in the event of:

• Engine running for at least 3 seconds.

Courtesy of VOLVO CARS CORPORATION

Substitute Value 

• None.

Possible Source 

• Look for the cause of the fault in the brake control module (BCM).

Fault symptom[s] 

• IV, Text window and warning symbol/Text message