Diagnostic Trouble Code (DTC) Information ECM-P060696
Condition
The Engine control module (ECM) continuously monitors a number of internal signals through calculations and compares them. The aim is to ensure reliability during operation.
The diagnostic trouble code (DTC) is stored if the control module detects that:
- Internal checks give unacceptable results.
The control module's test for the diagnostic trouble code (DTC) starts in the event of:
- Ignition on.
Substitute Value
- Various internal signals in the engine control module (ECM) are replaced with default values.
Possible Source
- Poorly charged battery or corroded connecting wiring.
- Damaged software in the engine control module (ECM).
- Damaged engine control module (ECM).
Fault symptom[s]
- DL, Warning lights and chimes/Malfunction Indicator Light ("Check engine" light) indication/no indication
- AJ, Driving/Poor performance/lacks power
- 1Q, Driving/Poor performance/lacks power/At take off
- AK, Driving/Hesitates/surges/Unsure when/at all times
- AL, Driving/Hesitates/surges/During acceleration
- AM, Driving/Hesitates/surges/During deceleration
- BV, Driving/Hesitates/surges/At steady speed