Checking Wiring And Terminals
WARNING: This page is about a different car, the 2007 Volvo XC90, 2006 Volvo XC90, 2005 Volvo XC90, 2004 Volvo XC90, and 2003 Volvo XC90. However, it is still accessible from the selected car via links, so may be relevant.
- Ignition off.
Check the brake control module connector. Check for damaged or bent terminal pins. Check for contact resistance and oxidation.
Check the wiring for CAN communication between terminals #A11 (#A11) and #B13 (#B13) and between terminal #15 (#A15) and #B1 (#B11). Check for an open-circuit. Check for a short-circuit to ground. Check for a short-circuit to supply voltage.
Check that the wiring is not too close to a source of interference such as a carphone etc.
Remedy as necessary.
Other information
- To check the wiring and connections, see CONTENTS .
- Continue
see VERIFICATION