Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Volvo >> 2012 >> XC90 Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 7 (Brake Control Module (BCM) Diagnostic Trouble Codes - 1 Of 3) >> BCM-0052: Control Module. Internal Fault (2003-2004) >> Internal Fault >> Replacing The Control Module And Programming

Replacing The Control Module And Programming

WARNING: This page is about a different car, the 2007 Volvo XC90, 2006 Volvo XC90, 2005 Volvo XC90, 2004 Volvo XC90, and 2003 Volvo XC90. However, it is still accessible from the selected car via links, so may be relevant.

The control module has registered an internal fault.

CAUTION:

A new control module is delivered without software. The control module must be programmed in order to function after replacement.

For further information about programming and replacing the control module, see BRAKE CONTROL MODULE (BCM), REPLACING .

Fig 1: ABS Control Module
GLL104603Courtesy of VOLVO CARS CORPORATION
scientia non olet · About Mike's Workshop Manuals