Reading Off The Alarm Cause

Different stored values can be read off using this function:

• Alarm cause. Last stored input signal that triggered the alarm:
  • Not triggered. The alarm has not been triggered since the last reset
  • Voltage drop, siren control module (SCM)
  • Vehicle tilt sensor
  • Driver's door
  • Passenger door
  • Trunk lid / Tailgate
  • Hood
  • Open-circuit in the communication between the central electronic module (CEM) and the siren
  • Start attempts.
• Alarm status, fault in vehicle tilt sensor. The value can be True or False
  • Activated
  • Deactivated
  • Triggered.
• Alarm status, fault in siren. The value can be True or False
  • Activated
  • Deactivated
  • Triggered.
• Alarm status. The value can be the following:
  • Activated
  • Deactivated
  • Triggered.
• Alarm cause, table. Reading off the 9 most recent alarm causes.