Adjusting Front Toe Angle

Fig 1: Identifying Lock Nut, Outer Steering Arm Inner To Steering Arm Inner

Courtesy of VOLVO CARS CORPORATION

Adjust with the tie rods once the lock nuts have been slackened. Positive adjustment values generate a toe-in angle while negative values generate a toe-out angle.

For the correct values for each model, see WHEEL CAMBERS .

NOTE: The lengths of the tie rods must not vary between themselves by more than 2 mm. Measure between the lock nut and the edge of thread.

Treat the strut threads using rustproofing agent after tightening.