Adjusting Front Toe Angle
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2013 Volvo C70, 2012 Volvo C70, 2011 Volvo C70, 2010 Volvo C70, and 2009 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.
Adjust with the tie rods once the lock nuts have been slackened. Positive adjustment values generate a toe-in angle while negative values generate a toe-out angle.
For the correct values for each model, see WHEEL CAMBERS .
NOTE:
The lengths of the tie rods must not vary between themselves by more than 2 mm. Measure between the lock nut and the edge of thread.
Treat the strut threads using rustproofing agent after tightening.