Alarm Signal Outputs

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2013 Volvo C70, 2012 Volvo C70, 2011 Volvo C70, 2010 Volvo C70, and 2009 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Alarm Signal Outputs

Courtesy of VOLVO CARS CORPORATION

Output signals from the accessory electronic module (AEM) (4/78) are used when installing an after market alarm unit.

Access is available to signals indicating:

alarm status
door status
key status.

In this case the accessory electronic module (AEM) functions as a port between the Controller area network (CAN) of the vehicle and the after market alarm unit.