Reading Off Input And Output Signals
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2013 Volvo C70, 2012 Volvo C70, 2011 Volvo C70, 2010 Volvo C70, and 2009 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.
This function can be used to continuously read off the values and status of the accessory electronic module (AEM) input and output signals.
The following parameters can be read off:
- power supply to the accessory electronic module (AEM)
- voltage level of the signal to the relay, engine block heater
- voltage level of alarm signals P0, P1, S0 and S1
- voltage level of the signal from tele-mute.