Checking The Wiring And Terminals

Check the differential electronic module (DEM) connector. Check for damaged or bent terminal pins. Check for contact resistance. Check for oxidation.

Check the wiring for CAN communication between the differential electronic module (DEM) connector and the 64/5D junction point. Check for an open-circuit.

Remedy as necessary.

Other information 

• see CONNECTING THE BREAKOUT BOX
• see CONTENTS

Fig 2: Breakout Box

Courtesy of VOLVO CARS OF NORTH AMERICA.

Fig 3: Identifying Ohm Meter

Courtesy of VOLVO CARS OF NORTH AMERICA.

see VERIFICATION