Error Management In The Controller Area Network (Can): Notes

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2013 Volvo C70, 2012 Volvo C70, 2011 Volvo C70, 2010 Volvo C70, and 2009 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.

The control area network (CAN) is monitored and controlled by the central electronic module (CEM). When the central electronic module (CEM) detects a fault in the controller area network (CAN) a diagnostic trouble code (DTC) is stored in the central electronic module (CEM). There are different types of diagnostic trouble codes (DTCs) depending on the type of fault.

Fault types which are processed are:

Electrical faults
No communication from a control module
Faulty communication.

NOTE:

To troubleshoot respective CAN-net, see troubleshooting for CAN-related diagnostic trouble codes for Central electronic module (CEM). For example, choose any of CEM-DF01 - DF17 depending on CAN-net.