Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Volvo >> 2011 >> C30 R-Design, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 39 (Electronics - Design And Function - 1 Of 4) >> Central Electronic Module (CEM) (2006-2013) >> Design >> Brake Light

Brake Light

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2013 Volvo C70, 2012 Volvo C70, 2011 Volvo C70, 2010 Volvo C70, and 2009 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Rear Fog Lamps
GLL128552Courtesy of VOLVO CARS CORPORATION

The stop lamps are in the tail lamps. The lamps light when the stop lamp switch on the brake pedal is closed. The stop lamp switch is connected to the central electronic module (CEM). The lamps are powered directly via an output on the central electronic module (CEM).

The stop lamps function even when the ignition is not on. When the ignition is not on, the central electronic module (CEM) is still powered. However the module is in a current saving mode. If the stop lamp switch is activated, the central electronic module (CEM) will also be activated and the stop lamps will come on.

To detect faults in the stop lamps, the central electronic module (CEM) reads the power consumption of the lamp circuit. If the power consumption falls below a certain limit, a fault is indicated and a text message is displayed in the driver information module.