Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Volvo >> 2011 >> C30 R-Design, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 39 (Electronics - Design And Function - 1 Of 4) >> Accessory Electronic Module (AEM) (2006-2013) >> Design >> Alarm Signal Outputs

Alarm Signal Outputs

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2013 Volvo C70, 2012 Volvo C70, 2011 Volvo C70, 2010 Volvo C70, and 2009 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.

An after market alarm unit can be connected to the accessory electronic module (AEM). The system consists of four output signals which can be used as input signals in the external alarm system via a cable harness. The accessory electronic module (AEM) uses the existing Controller area network (CAN) to receive/forward signals for the vehicle alarm, key and door status.

When installing an after market alarm system the vehicle must be configured using new software. Configuration is carried out via VIDA (Volvo scan tool).

There are diagnostics for the alarm signal outputs.

scientia non olet · About Mike's Workshop Manuals