Programming Or Replacing The Engine Control Module (ECM)

WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2014 Volvo XC90, 2013 Volvo XC90, 2012 Volvo XC90, 2011 Volvo XC90, and 2010 Volvo XC90. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Ignition OFF

Courtesy of VOLVO CARS CORPORATION

Ignition off.
The engine control module (ECM) has registered an internal fault. Replace the engine control module (ECM). See ENGINE CONTROL MODULE (ECM), REPLACING .

NOTE:
After replacing the engine control module (ECM), the throttle unit must be adapted using the vehicle communication input: "Throttle unit adaptation".

Remedy as necessary.

Fig 2: Engine Control Module
Courtesy of VOLVO CARS CORPORATION

Continue
Refer to INFORMATION