Connecting The Test Box

WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2014 Volvo XC90, 2013 Volvo XC90, 2012 Volvo XC90, 2011 Volvo XC90, and 2010 Volvo XC90. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Breakout Box

Courtesy of VOLVO CARS CORPORATION

Ignition off
Remove interior fuse 24 (11C/24)
Loosen the combined instrument as described in, see DRIVER INFORMATION MODULE (DIM), REPLACING
Release control unit connector.

Connect adapter see 9511463 (22-16-14-pin) to control unit connector and connect test box see 9511428 and wire see 9511499 to adapter.

Alternatively connect test box see 9813190 to adapter.

Disconnect the test box in the reverse order.

Fig 2: Identifying Control Module Connector & Locking Handle

Courtesy of VOLVO CARS CORPORATION

Additional information:

To remove the combined instrument, see DRIVER INFORMATION MODULE (DIM), REPLACING
For information about signals and other values, see DRIVER INFORMATION MODULE (DIM) SIGNAL DESCRIPTION .