Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Volvo >> 2009 >> V70 >> Repair and Diagnosis >> External Pages >> Different car >> Section 102 (Programmable Customer Parameters And Vehicle Communication Information - Specifications, Other) >> Programmable Customer Parameters (2003-04) >> Programmable Customer Parameters >> Setting The Driver's Seat Using The Remote Control

Setting The Driver's Seat Using The Remote Control

WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2014 Volvo XC90, 2013 Volvo XC90, 2012 Volvo XC90, 2011 Volvo XC90, and 2010 Volvo XC90. However, it is still accessible from the selected car via links, so may be relevant.

This only applies to cars with power driver's seats with memory.

When this function is activated, the position of the seat and door mirrors will be stored when the car is locked with the remote control. When the same remote control is used to unlock the car, the driver's seat and door mirrors will be set to the positions stored for that specific remote control. Up to three remote controls can be stored.

The parameters that can be programmed are:

The setting for automatic adjustment of the front seats will remote control is programmed via the vehicle communication socket under function group 8, Power seat (power seat module (PSM)), Programming remote control settings.

scientia non olet · About Mike's Workshop Manuals