Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Volvo >> 2009 >> C30 R-Design, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 97 (Spring (Front) - Removal And Installation) >> Spring Front, Helical Spring And Torsion Spring >> Spring And Suspension (B5254T7, Aw55-50/51SN; 2011) >> Installing The Spring >> Installing The Spring Strut

Installing The Spring Strut

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2013 Volvo C70, 2012 Volvo C70, 2011 Volvo C70, 2010 Volvo C70, and 2009 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.

Install the spring strut in the body. Use new  nuts and the new screw. See: TIGHTENING TORQUE .

Install the wheel spindle on the spring strut.

Remove: see 9997088 .

Install the 1 screw. Tighten. See: TIGHTENING TORQUE .

Remove the 1 nut from the ball joint. Press down the control arm. Use: see 9997076 .

Install: 

scientia non olet · About Mike's Workshop Manuals