Installing engine compartment components

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2007 Volvo V70, 2006 Volvo V70, 2005 Volvo V70, 2004 Volvo V70, and 2003 Volvo V70. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Engine Hoses

Courtesy of VOLVO CARS OF NORTH AMERICA.

Install:

the inner of the two hose couplings for the passenger compartment heater connecting sleeve in the firewall
the charge air pipe for the turbocharger (TC)
the hose between the intake manifold and charge air cooler (CAC)
the clamp for the cable harness on the engine.

Tighten the nut for the rear engine pad. Tighten to 50 Nm .

Fig 2: View Of Engine Compartment Components

Courtesy of VOLVO CARS OF NORTH AMERICA.

Install:

the air cleaner (ACL) housing assembly with the intake manifold and connections
the ground lead for the mounting on the engine (where applicable)
the upper torque rod between the wheel arches. Tighten the screws. Tighten to 50 Nm
the screw for the torque rod to engine mounting. Tighten to 80 Nm .

Fill with coolant. Carefully check while reaching operating temperature or test driving that the level remains the same and that there is no leakage.

Also see Transmission replacement, post-checking .