Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Volvo >> 2004 >> S60 R >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Wheel Alignment - Specifications & Procedures) >> Wheel Alignment Procedures >> Camber Measurement >> Rear Measurement

Rear Measurement

WARNING: This page is about a different variant/trim than selected.
  1. Check for play in the wheel bearings, the lateral link bushings and the control arm bushings. Set up and calibrate the test equipment being used. The car must be on a flat surface with the wheels on moveable plates.
  2. Check camber angle. See WHEEL ALIGNMENT SPECIFICATIONS  . Rear camber is not adjustable. If the rear camber angle is not within specifications, replace the faulty or damaged component.
scientia non olet · About Mike's Workshop Manuals