Installing The Control System
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2007 Volvo V70, 2006 Volvo V70, 2005 Volvo V70, 2004 Volvo V70, and 2003 Volvo V70. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Ensure the lever for the gear selector is set to neutral.
Align the control system on the lever for the gear selector.
Install:
- the screws for the control system
- a new gasket for the cover on the control system. Note that the screws are of different lengths (measured in mm).
Tighten the screws alternately to light contact. Then tighten alternately. Tighten to 10 Nm .