Adjusting Front Toe Angle
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2009 Volvo S60, 2008 Volvo S60, 2007 Volvo S60, 2006 Volvo S60, and 2005 Volvo S60. However, it is still accessible from the selected car via links, so may be relevant.
Adjust with the tie rods after loosening the lock nuts. Adjusting towards a positive value will give toe-in and towards a negative value toe-out. To obtain correct values on respective model variants, refer to Wheel Camber, Specifications .
NOTE:
The lengths of the tie rods must not vary between themselves by more than 2 mm. Measure between the lock nut and the edge of thread.
Tighten the lock nut, outer steering arm inner to steering arm inner. See Tightening Torque .
Treat the strut threads using rustproofing agent after tightening.