Installing components on the engine and sub-frame

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2009 Volvo S60, 2008 Volvo S60, 2007 Volvo S60, 2006 Volvo S60, and 2005 Volvo S60. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Engine Pads And Screws

Courtesy of VOLVO CARS OF NORTH AMERICA.

Install the 1 x M10 screw for the front engine pad. Tighten.

Loosely install the screw for the engine pad/steering gear.

Tighten the M10 screw for the rear engine pad.

Install the mounting for the engine stabilizer brace to the transmission. Use new screws. Tighten. See Summary of tightening torques for specific components .