Signal Specification
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2009 Volvo S60, 2008 Volvo S60, 2007 Volvo S60, 2006 Volvo S60, and 2005 Volvo S60. However, it is still accessible from the selected car via links, so may be relevant.
General
All values contained below are between the relevant terminal and signal ground, unless otherwise indicated in brackets.
NOTE:
It is important to connect the breakout box and check the ground terminals before taking readings.
| U= | DC voltage in volts (V) | UAC = | AC voltage in volts (V) |
| Ubat = | Battery voltage (V) | f = | Frequency in Hertz (Hz) |
| Ulow = | Voltage approximately 0 V | t = | Time in second(s) |
Signal Table Connector A
| Control module terminal | Breakout box terminal | Signal type | Ignition on | Other |
|---|---|---|---|---|
| #A1 | #1 | - | - | - |
| #A2 | #2 | Signal malfunction indicator lamp (MIL) | Lamp off: U = Ubat Lamp on: U = Ulow |
- |
| #A3 | #3 | Power supply Extended X | U = Ubat | - |
| #A4 | #10 | Signal ground | U = Ulow | - |
| #A5 | #9 | Signal (+) brake fluid level | Lamp off: U = U bat Lamp on: U = Ulow | - |
| #A6 | #8 | Signal (+) parking brake | Lamp off: U = U bat Lamp on: U = Ulow | - |
| #A7 | #7 | Control modules communication cable (CAN L) | U = 1.5-2.5 V | - |
| #A8 | #6 | Control modules communication cable (CAN H) | U = 2.5-3.5 V | - |
| #A9 | #5 | Control modules communication cable (CAN L) | U = 1.5-2.5 V | - |
| #A10 | #4 | Control modules communication cable (CAN H) | U = 2.5-3.5 V | - |