Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Volvo >> 2000 >> S80 Base >> Repair and Diagnosis >> Restraints >> Passive Restraints >> Inflatable Curtain Module - Removal And Installation >> Restraints >> Igniter wire connector >> Panel, B-post, replacing >> Installing the B-post ventilation vent

Installing the B-post ventilation vent

Install: 

In reverse order.

Tighten the seat belt. Tighten to 48 Nm. 

CAUTION:

When installing the B-post panel: Check that the wiring for the seat belt, tensioner and sensor is tensioned and secured in the correct position. Otherwise the wiring may be damaged when the panel is installed.

scientia non olet · About Mike's Workshop Manuals