Method Of Removal

Fig 1: Identifying RAPGARD Film Pulled Off By Hand

Courtesy of VOLVO CARS OF NORTH AMERICA.

Pull off the RAPGARD film by hand only. No tools may be used. 

Begin by loosening the film at the corners.

Fig 2: Identifying RAPGARD Correct And Incorrect Removal

Courtesy of VOLVO CARS OF NORTH AMERICA.

Place the hands as close as possible to the body so that the film is lifted off parallel to the body as shown.

This will minimize the quantity of adhesive remaining on the body.

The method shown in the crossed-out graphic is incorrect.

Fig 3: Identifying RAPGARD Alternately Pulled From Two Corners

Courtesy of VOLVO CARS OF NORTH AMERICA.

On large surfaces, such as the hood and roof, pull alternately from two corners until the film is loose.