Exposing The Sub-Frame

Fig 1: Identifying Cable Duct Screw And Ground Lead Screw

Courtesy of VOLVO CARS OF NORTH AMERICA.

Remove: 

• the screw for the cable duct
• the screw for the ground lead.

Fig 2: Identifying Front Engine Pad And Screw

Courtesy of VOLVO CARS OF NORTH AMERICA.

Remove the screw for the front engine pad.

Fig 3: Identifying Oil Pipe For Steering Gear, Screw Clip For Steering Gear Return Line And Fuel Line For Engine Block Heater

Courtesy of VOLVO CARS OF NORTH AMERICA.

Remove: 

• the oil pipe for the steering gear from the snap fasteners along the sub-frame
• the screw clip for the steering gear return line
• the fuel line for the engine block heater and the engine block heater (if applicable) on the left side of the sub-frame.

Fig 4: Identifying Torque Rod To Engine Screws

Courtesy of VOLVO CARS OF NORTH AMERICA.

Remove the 4 screws holding the torque rod to the engine.

Fig 5: Identifying Anti-Roll Bar Links

Courtesy of VOLVO CARS OF NORTH AMERICA.

Remove the anti-roll bar links from the anti-roll bar on both sides. Counterhold using a Torx wrench so that the ball joint boot is not damaged.