Engine Performance Diagnostic Trouble Code (DTC) Diagnostics - 6 Of 14 (Convertible)

• ECM-2310: Injector 1. Signal Missing. Intermittent Fault (B5234T3; 1999-2002)
  • Diagnostic trouble code (DTC) information
  • Signal missing. Intermittent fault
    • Checking cables and connectors
    • Information
      • Fault-tracing information
• ECM-2310: Injector 1. Signal Missing. Intermittent Fault (B5234T9; B5244T7; 2003-2004)
  • Diagnostic trouble code (DTC) information
  • Signal missing. Intermittent fault
    • Checking wiring and connectors
    • Information
      • Fault-tracing information
• ECM-2310: Injector 1. Signal Missing. Intermittent Fault (B5244T; 2000-2002)
  • Diagnostic trouble code (DTC) information
  • Signal missing. Intermittent fault
• ECM-2310: Injector 1. Signal Missing. Intermittent Fault (B5254T; 1999)
  • Diagnostic trouble code (DTC) information
  • Signal missing. Intermittent fault
• ECM-2310: Injector 1. Signal Missing. Permanent Fault (B5234T3; 1999-2002)
  • Diagnostic trouble code (DTC) information
  • Signal missing. Permanent fault
    • Checking the connector
    • Checking components and wiring
      • Notes
      • Verification
    • Information
      • Fault-tracing information
• ECM-2310: Injector 1. Signal Missing. Permanent Fault (B5234T9; B5244T7; 2003-2004)
  • Diagnostic trouble code (DTC) information
  • Signal missing. Permanent fault
    • Checking the connector
    • Checking components and wiring
      • Notes
      • Verification
    • Information
      • Fault-tracing information
• ECM-2310: Injector 1. Signal Missing. Permanent Fault (B5244T; 2000-2002)
  • Diagnostic trouble code (DTC) information
  • Signal missing. Permanent fault
• ECM-2310: Injector 1. Signal Missing. Permanent Fault (B5254T; 1999)
  • Diagnostic trouble code (DTC) information
  • Signal missing. Permanent fault
• ECM-2310: Injector 1. Signal Too High. Intermittent Fault (B5234T3; 1999-2002)
  • Diagnostic trouble code (DTC) information
  • Signal too high. Intermittent fault
    • Checking cables
    • Information
      • Fault-tracing information
• ECM-2310: Injector 1. Signal Too High. Intermittent Fault (B5234T9; B5244T7; 2003-2004)
  • Diagnostic trouble code (DTC) information
  • Signal too high. Intermittent fault
    • Checking the wiring
    • Information
      • Fault-tracing information
• ECM-2310: Injector 1. Signal Too High. Intermittent Fault (B5244T; 2000-2002)
  • Diagnostic trouble code (DTC) information
  • Signal too high. Intermittent fault
• ECM-2310: Injector 1. Signal Too High. Intermittent Fault (B5254T; 1999)
  • Diagnostic trouble code (DTC) information
  • Signal too high. Intermittent fault
• ECM-2310: Injector 1. Signal Too High. Permanent Fault (B5234T3; 1999-2002)
  • Diagnostic trouble code (DTC) information
  • Signal too high. Permanent fault
    • Checking wiring and components
      • Notes
      • Verification
    • Information
      • Fault-tracing information
• ECM-2310: Injector 1. Signal Too High. Permanent Fault (B5234T9; B5244T7; 2003-2004)
  • Diagnostic trouble code (DTC) information
  • Signal too high. Permanent fault
    • Checking components and wiring
      • Notes
      • Verification
    • Information
      • Fault-tracing information
• ECM-2310: Injector 1. Signal Too High. Permanent Fault (B5244T; 2000-2002)
  • Diagnostic trouble code (DTC) information
  • Signal too high. Permanent fault
• ECM-2310: Injector 1. Signal Too High. Permanent Fault (B5254T; 1999)
  • Diagnostic trouble code (DTC) information
  • Signal too high. Permanent fault
• ECM-2310: Injector 1. Signal Too Low. Intermittent Fault (B5234T3; 1999-2002)
  • Diagnostic trouble code (DTC) information
  • Signal too low. Intermittent fault
    • Checking cables
    • Information
      • Fault-tracing information
• ECM-2310: Injector 1. Signal Too Low. Intermittent Fault (B5234T9; B5244T7; 2003-2004)
  • Diagnostic trouble code (DTC) information
  • Signal too low. Intermittent fault
    • Checking the wiring
    • Information
      • Fault-tracing information
• ECM-2310: Injector 1. Signal Too Low. Intermittent Fault (B5244T; 2000-2002)
  • Diagnostic trouble code (DTC) information
  • Signal too low. Intermittent fault
• ECM-2310: Injector 1. Signal Too Low. Intermittent Fault (B5254T; 1999)
  • Diagnostic trouble code (DTC) information
  • Signal too low. Intermittent fault
• ECM-2310: Injector 1. Signal Too Low. Permanent Fault (B5234T3; 1999-2002)
  • Diagnostic trouble code (DTC) information
  • Signal too low. Permanent fault
    • Checking wiring and components
      • Notes
      • Verification
    • Information
      • Fault-tracing information
• ECM-2310: Injector 1. Signal Too Low. Permanent Fault (B5234T9; B5244T7; 2003-2004)
  • Diagnostic trouble code (DTC) information
  • Signal too low. Permanent fault
    • Checking components and wiring
      • Notes
      • Verification
    • Information
      • Fault-tracing information
• ECM-2310: Injector 1. Signal Too Low. Permanent Fault (B5244T; 2000-2002)
  • Diagnostic trouble code (DTC) information
  • Signal too low. Permanent fault
• ECM-2310: Injector 1. Signal Too Low. Permanent Fault (B5254T; 1999)
  • Diagnostic trouble code (DTC) information
  • Signal too low. Permanent fault
• ECM-2310: Injector Cylinder 2. Faulty Signal (B5244S; 2000)
  • Diagnostic trouble code (DTC) information ECM-23X0
  • Faulty signal
    • Checking for intermittent faults
    • Checking the connector
    • Checking injectors
    • Fault-tracing information
    • Information
      • Fault-tracing information
    • Verification
      • Verification
• ECM-2320: Injector 2. Signal Missing. Intermittent Fault (B5234T3; 1999-2002)
  • Diagnostic trouble code (DTC) information
  • Signal missing. Intermittent fault
• ECM-2320: Injector 2. Signal Missing. Intermittent Fault (B5234T9; B5244T7; 2003-2004)
  • Diagnostic trouble code (DTC) information
  • Signal missing. Intermittent fault
• ECM-2320: Injector 2. Signal Missing. Intermittent Fault (B5244T; 2000-2002)
  • Diagnostic trouble code (DTC) information
  • Signal missing. Intermittent fault
• ECM-2320: Injector 2. Signal Missing. Intermittent Fault (B5254T; 1999)
  • Diagnostic trouble code (DTC) information
  • Signal missing. Intermittent fault
• ECM-2320: Injector 2. Signal Missing. Permanent Fault (B5234T3; 1999-2002)
  • Diagnostic trouble code (DTC) information
  • Signal missing. Permanent fault
• ECM-2320: Injector 2. Signal Missing. Permanent Fault (B5234T9; B5244T7; 2003-2004)
  • Diagnostic trouble code (DTC) information
  • Signal missing. Permanent fault
• ECM-2320: Injector 2. Signal Missing. Permanent Fault (B5244T; 2000-2002)
  • Diagnostic trouble code (DTC) information
  • Signal missing. Permanent fault
• ECM-2320: Injector 2. Signal Missing. Permanent Fault (B5254T; 1999)
  • Diagnostic trouble code (DTC) information
  • Signal missing. Permanent fault
• ECM-2320: Injector 2. Signal Too High. Intermittent Fault (B5234T3; 1999-2002)
  • Diagnostic trouble code (DTC) information
  • Signal too high. Intermittent fault
• ECM-2320: Injector 2. Signal Too High. Intermittent Fault (B5234T9; B5244T7; 2003-2004)
  • Diagnostic trouble code (DTC) information
  • Signal too high. Intermittent fault
• ECM-2320: Injector 2. Signal Too High. Intermittent Fault (B5244T; 2000-2002)
  • Diagnostic trouble code (DTC) information
  • Signal too high. Intermittent fault
• ECM-2320: Injector 2. Signal Too High. Intermittent Fault (B5254T; 1999)
  • Diagnostic trouble code (DTC) information
  • Signal too high. Intermittent fault
• ECM-2320: Injector 2. Signal Too High. Permanent Fault (B5234T3; 1999-2002)
  • Diagnostic trouble code (DTC) information
  • Signal too high. Permanent fault
• ECM-2320: Injector 2. Signal Too High. Permanent Fault (B5234T9; B5244T7; 2003-2004)
  • Diagnostic trouble code (DTC) information
  • Signal too high. Permanent fault
• ECM-2320: Injector 2. Signal Too High. Permanent Fault (B5244T; 2000-2002)
  • Diagnostic trouble code (DTC) information
  • Signal too high. Permanent fault
• ECM-2320: Injector 2. Signal Too High. Permanent Fault (B5254T; 1999)
  • Diagnostic trouble code (DTC) information
  • Signal too high. Permanent fault
• ECM-2320: Injector 2. Signal Too Low. Intermittent Fault (B5234T3; 1999-2002)
  • Diagnostic trouble code (DTC) information
  • Signal too low. Intermittent fault
• ECM-2320: Injector 2. Signal Too Low. Intermittent Fault (B5234T9; B5244T7; 2003-2004)
  • Diagnostic trouble code (DTC) information
  • Signal too low. Intermittent fault
• ECM-2320: Injector 2. Signal Too Low. Intermittent Fault (B5244T; 2000-2002)
  • Diagnostic trouble code (DTC) information
  • Signal too low. Intermittent fault
• ECM-2320: Injector 2. Signal Too Low. Intermittent Fault (B5254T; 1999)
  • Diagnostic trouble code (DTC) information
  • Signal too low. Intermittent fault
• ECM-2320: Injector 2. Signal Too Low. Permanent Fault (B5234T3; 1999-2002)
  • Diagnostic trouble code (DTC) information
  • Signal too low. Permanent fault
• ECM-2320: Injector 2. Signal Too Low. Permanent Fault (B5234T9; B5244T7; 2003-2004)
  • Diagnostic trouble code (DTC) information
  • Signal too low. Permanent fault
• ECM-2320: Injector 2. Signal Too Low. Permanent Fault (B5244T; 2000-2002)
  • Diagnostic trouble code (DTC) information
  • Signal too low. Permanent fault
• ECM-2320: Injector 2. Signal Too Low. Permanent Fault (B5254T; 1999)
  • Diagnostic trouble code (DTC) information
  • Signal too low. Permanent fault
• ECM-2320: Injector Cylinder 3. Faulty Signal (B5244S; 2000)
  • Diagnostic trouble code (DTC) information ECM-23X0
  • Faulty signal
• ECM-2330: Injector 3. Signal Missing. Intermittent Fault (B5234T3; 1999-2002)
  • Diagnostic trouble code (DTC) information
  • Signal missing. Intermittent fault
• ECM-2330: Injector 3. Signal Missing. Intermittent Fault (B5234T9; B5244T7; 2003-2004)
  • Diagnostic trouble code (DTC) information
  • Signal missing. Intermittent fault
• ECM-2330: Injector 3. Signal Missing. Intermittent Fault (B5244T; 2000-2002)
  • Diagnostic trouble code (DTC) information
  • Signal missing. Intermittent fault
• ECM-2330: Injector 3. Signal Missing. Intermittent Fault (B5254T; 1999)
  • Diagnostic trouble code (DTC) information
  • Signal missing. Intermittent fault
• ECM-2330: Injector 3. Signal Missing. Permanent Fault (B5234T3; 1999-2002)
  • Diagnostic trouble code (DTC) information
  • Signal missing. Permanent fault
• ECM-2330: Injector 3. Signal Missing. Permanent Fault (B5234T9; B5244T7; 2003-2004)
  • Diagnostic trouble code (DTC) information
  • Signal missing. Permanent fault
• ECM-2330: Injector 3. Signal Missing. Permanent Fault (B5244T; 2000-2002)
  • Diagnostic trouble code (DTC) information
  • Signal missing. Permanent fault
• ECM-2330: Injector 3. Signal Missing. Permanent Fault (B5254T; 1999)
  • Diagnostic trouble code (DTC) information
  • Signal missing. Permanent fault
• ECM-2330: Injector 3. Signal Too High. Intermittent Fault (B5234T3; 1999-2002)
  • Diagnostic trouble code (DTC) information
  • Signal too high. Intermittent fault
• ECM-2330: Injector 3. Signal Too High. Intermittent Fault (B5234T9; B5244T7; 2003-2004)
  • Diagnostic trouble code (DTC) information
  • Signal too high. Intermittent fault
• ECM-2330: Injector 3. Signal Too High. Intermittent Fault (B5244T; 2000-2002)
  • Diagnostic trouble code (DTC) information
  • Signal too high. Intermittent fault
• ECM-2330: Injector 3. Signal Too High. Intermittent Fault (B5254T; 1999)
  • Diagnostic trouble code (DTC) information
  • Signal too high. Intermittent fault
• ECM-2330: Injector 3. Signal Too High. Permanent Fault (B5234T3; 1999-2002)
  • Diagnostic trouble code (DTC) information
  • Signal too high. Permanent fault
• ECM-2330: Injector 3. Signal Too High. Permanent Fault (B5234T9; B5244T7; 2003-2004)
  • Diagnostic trouble code (DTC) information
  • Signal too high. Permanent fault
• ECM-2330: Injector 3. Signal Too High. Permanent Fault (B5244T; 2000-2002)
  • Diagnostic trouble code (DTC) information
  • Signal too high. Permanent fault
• ECM-2330: Injector 3. Signal Too High. Permanent Fault (B5254T; 1999)
  • Diagnostic trouble code (DTC) information
  • Signal too high. Permanent fault
• ECM-2330: Injector 3. Signal Too Low. Intermittent Fault (B5234T3; 1999-2002)
  • Diagnostic trouble code (DTC) information
  • Signal too low. Intermittent fault
• ECM-2330: Injector 3. Signal Too Low. Intermittent Fault (B5234T9; B5244T7; 2003-2004)
  • Diagnostic trouble code (DTC) information
  • Signal too low. Intermittent fault
• ECM-2330: Injector 3. Signal Too Low. Intermittent Fault (B5244T; 2000-2002)
  • Diagnostic trouble code (DTC) information
  • Signal too low. Intermittent fault
• ECM-2330: Injector 3. Signal Too Low. Intermittent Fault (B5254T; 1999)
  • Diagnostic trouble code (DTC) information
  • Signal too low. Intermittent fault
• ECM-2330: Injector 3. Signal Too Low. Permanent Fault (B5234T3; 1999-2002)
  • Diagnostic trouble code (DTC) information
  • Signal too low. Permanent fault
• ECM-2330: Injector 3. Signal Too Low. Permanent Fault (B5234T9; B5244T7; 2003-2004)
  • Diagnostic trouble code (DTC) information
  • Signal too low. Permanent fault
• ECM-2330: Injector 3. Signal Too Low. Permanent Fault (B5244T; 2000-2002)
  • Diagnostic trouble code (DTC) information
  • Signal too low. Permanent fault
• ECM-2330: Injector 3. Signal Too Low. Permanent Fault (B5254T; 1999)
  • Diagnostic trouble code (DTC) information
  • Signal too low. Permanent fault
• ECM-2330: Injector Cylinder 4. Faulty Signal (B5244S; 2000)
  • Diagnostic trouble code (DTC) information ECM-23X0
  • Faulty signal
• ECM-2340: Injector 4. Signal Missing. Intermittent Fault (B5234T3; 1999-2002)
  • Diagnostic trouble code (DTC) information
  • Signal missing. Intermittent fault
• ECM-2340: Injector 4. Signal Missing. Intermittent Fault (B5234T9; B5244T7; 2003-2004)
  • Diagnostic trouble code (DTC) information
  • Signal missing. Intermittent fault
• ECM-2340: Injector 4. Signal Missing. Intermittent Fault (B5244T; 2000-2002)
  • Diagnostic trouble code (DTC) information
  • Signal missing. Intermittent fault
• ECM-2340: Injector 4. Signal Missing. Intermittent Fault (B5254T; 1999)
  • Diagnostic trouble code (DTC) information
  • Signal missing. Intermittent fault
• ECM-2340: Injector 4. Signal Missing. Permanent Fault (B5234T3; 1999-2002)
  • Diagnostic trouble code (DTC) information
  • Signal missing. Permanent fault
• ECM-2340: Injector 4. Signal Missing. Permanent Fault (B5234T9; B5244T7; 2003-2004)
  • Diagnostic trouble code (DTC) information
  • Signal missing. Permanent fault
• ECM-2340: Injector 4. Signal Missing. Permanent Fault (B5244T; 2000-2002)
  • Diagnostic trouble code (DTC) information
  • Signal missing. Permanent fault
• ECM-2340: Injector 4. Signal Missing. Permanent Fault (B5254T; 1999)
  • Diagnostic trouble code (DTC) information
  • Signal missing. Permanent fault
• ECM-2340: Injector 4. Signal Too High. Intermittent Fault (B5234T3; 1999-2002)
  • Diagnostic trouble code (DTC) information
  • Signal too high. Intermittent fault
• ECM-2340: Injector 4. Signal Too High. Intermittent Fault (B5234T9; B5244T7; 2003-2004)
  • Diagnostic trouble code (DTC) information
  • Signal too high. Intermittent fault
• ECM-2340: Injector 4. Signal Too High. Intermittent Fault (B5244T; 2000-2002)
  • Diagnostic trouble code (DTC) information
  • Signal too high. Intermittent fault
• ECM-2340: Injector 4. Signal Too High. Intermittent Fault (B5254T; 1999)
  • Diagnostic trouble code (DTC) information
  • Signal too high. Intermittent fault
• ECM-2340: Injector 4. Signal Too High. Permanent Fault (B5234T3; 1999-2002)
  • Diagnostic trouble code (DTC) information
  • Signal too high. Permanent fault
• ECM-2340: Injector 4. Signal Too High. Permanent Fault (B5234T9; B5244T7; 2003-2004)
  • Diagnostic trouble code (DTC) information
  • Signal too high. Permanent fault
• ECM-2340: Injector 4. Signal Too High. Permanent Fault (B5244T; 2000-2002)
  • Diagnostic trouble code (DTC) information
  • Signal too high. Permanent fault
• ECM-2340: Injector 4. Signal Too High. Permanent Fault (B5254T; 1999)
  • Diagnostic trouble code (DTC) information
  • Signal too high. Permanent fault
• ECM-2340: Injector 4. Signal Too Low. Intermittent Fault (B5234T3; 1999-2002)
  • Diagnostic trouble code (DTC) information
  • Signal too low. Intermittent fault
• ECM-2340: Injector 4. Signal Too Low. Intermittent Fault (B5234T9; B5244T7; 2003-2004)
  • Diagnostic trouble code (DTC) information
  • Signal too low. Intermittent fault
• ECM-2340: Injector 4. Signal Too Low. Intermittent Fault (B5244T; 2000-2002)
  • Diagnostic trouble code (DTC) information
  • Signal too low. Intermittent fault
• ECM-2340: Injector 4. Signal Too Low. Intermittent Fault (B5254T; 1999)
  • Diagnostic trouble code (DTC) information
  • Signal too low. Intermittent fault
• ECM-2340: Injector 4. Signal Too Low. Permanent Fault (B5234T3; 1999-2002)
  • Diagnostic trouble code (DTC) information
  • Signal too low. Permanent fault
• ECM-2340: Injector 4. Signal Too Low. Permanent Fault (B5234T9; B5244T7; 2003-2004)
  • Diagnostic trouble code (DTC) information
  • Signal too low. Permanent fault
• ECM-2340: Injector 4. Signal Too Low. Permanent Fault (B5244T; 2000-2002)
  • Diagnostic trouble code (DTC) information
  • Signal too low. Permanent fault
• ECM-2340: Injector 4. Signal Too Low. Permanent Fault (B5254T; 1999)
  • Diagnostic trouble code (DTC) information
  • Signal too low. Permanent fault
• ECM-2340: Injector Cylinder 5. Faulty Signal (B5244S; 2000)
  • Diagnostic trouble code (DTC) information ECM-23X0
  • Faulty signal
• ECM-2350: Injector 5. Signal Missing. Intermittent Fault (B5234T3; 1999-2002)
  • Diagnostic trouble code (DTC) information
  • Signal missing. Intermittent fault
• ECM-2350: Injector 5. Signal Missing. Intermittent Fault (B5234T9; B5244T7; 2003-2004)
  • Diagnostic trouble code (DTC) information
  • Signal missing. Intermittent fault
• ECM-2350: Injector 5. Signal Missing. Intermittent Fault (B5244T; 2000-2002)
  • Diagnostic trouble code (DTC) information
  • Signal missing. Intermittent fault
• ECM-2350: Injector 5. Signal Missing. Intermittent Fault (B5254T; 1999)
  • Diagnostic trouble code (DTC) information
  • Signal missing. Intermittent fault
• ECM-2350: Injector 5. Signal Missing. Permanent Fault (B5234T3; 1999-2002)
  • Diagnostic trouble code (DTC) information
  • Signal missing. Permanent fault
• ECM-2350: Injector 5. Signal Missing. Permanent Fault (B5234T9; B5244T7; 2003-2004)
  • Diagnostic trouble code (DTC) information
  • Signal missing. Permanent fault
• ECM-2350: Injector 5. Signal Missing. Permanent Fault (B5244T; 2000-2002)
  • Diagnostic trouble code (DTC) information
  • Signal missing. Permanent fault
• ECM-2350: Injector 5. Signal Missing. Permanent Fault (B5254T; 1999)
  • Diagnostic trouble code (DTC) information
  • Signal missing. Permanent fault
• ECM-2350: Injector 5. Signal Too High. Intermittent Fault (B5234T3; 1999-2002)
  • Diagnostic trouble code (DTC) information
  • Signal too high. Intermittent fault
• ECM-2350: Injector 5. Signal Too High. Intermittent Fault (B5234T9; B5244T7; 2003-2004)
  • Diagnostic trouble code (DTC) information
  • Signal too high. Intermittent fault
• ECM-2350: Injector 5. Signal Too High. Intermittent Fault (B5244T; 2000-2002)
  • Diagnostic trouble code (DTC) information
  • Signal too high. Intermittent fault
• ECM-2350: Injector 5. Signal Too High. Intermittent Fault (B5254T; 1999)
  • Diagnostic trouble code (DTC) information
  • Signal too high. Intermittent fault
• ECM-2350: Injector 5. Signal Too High. Permanent Fault (B5234T3; 1999-2002)
  • Diagnostic trouble code (DTC) information
  • Signal too high. Permanent fault
• ECM-2350: Injector 5. Signal Too High. Permanent Fault (B5234T9; B5244T7; 2003-2004)
  • Diagnostic trouble code (DTC) information
  • Signal too high. Permanent fault
• ECM-2350: Injector 5. Signal Too High. Permanent Fault (B5244T; 2000-2002)
  • Diagnostic trouble code (DTC) information
  • Signal too high. Permanent fault
• ECM-2350: Injector 5. Signal Too High. Permanent Fault (B5254T; 1999)
  • Diagnostic trouble code (DTC) information
  • Signal too high. Permanent fault
• ECM-2350: Injector 5. Signal Too Low. Intermittent Fault (B5234T3; 1999-2002)
  • Diagnostic trouble code (DTC) information
  • Signal too low. Intermittent fault
• ECM-2350: Injector 5. Signal Too Low. Intermittent Fault (B5234T9; B5244T7; 2003-2004)
  • Diagnostic trouble code (DTC) information
  • Signal too low. Intermittent fault
• ECM-2350: Injector 5. Signal Too Low. Intermittent Fault (B5244T; 2000-2002)
  • Diagnostic trouble code (DTC) information
  • Signal too low. Intermittent fault
• ECM-2350: Injector 5. Signal Too Low. Intermittent Fault (B5254T; 1999)
  • Diagnostic trouble code (DTC) information
  • Signal too low. Intermittent fault
• ECM-2350: Injector 5. Signal Too Low. Permanent Fault (B5234T3; 1999-2002)
  • Diagnostic trouble code (DTC) information
  • Signal too low. Permanent fault
• ECM-2350: Injector 5. Signal Too Low. Permanent Fault (B5234T9; B5244T7; 2003-2004)
  • Diagnostic trouble code (DTC) information
  • Signal too low. Permanent fault
• ECM-2350: Injector 5. Signal Too Low. Permanent Fault (B5244T; 2000-2002)
  • Diagnostic trouble code (DTC) information
  • Signal too low. Permanent fault
• ECM-2350: Injector 5. Signal Too Low. Permanent Fault (B5254T; 1999)
  • Diagnostic trouble code (DTC) information
  • Signal too low. Permanent fault
• ECM-2400: Fuel Pump (FP) Relay. Signal Missing (B5234T9; B5244T7; 2003-2004)
  • Diagnostic trouble code (DTC) information ECM-2400
  • Signal missing
    • Checking the cable and component
    • Verification
      • Verification
    • Information
      • Fault-tracing information
• ECM-2400: Fuel Pump (FP) Relay. Signal Too High (B5234T9; B5244T7; 2003-2004)
  • Diagnostic trouble code (DTC) information ECM-2400
  • Signal too high
    • Checking components and wiring
    • Verification
      • Verification
    • Information
      • Fault-tracing information
• ECM-2400: Fuel Pump (FP) Relay. Signal Too High (B5244S; 2000)
  • Diagnostic trouble code (DTC) information
  • Signal too high
    • Checking for intermittent faults
    • Checking the wiring
    • Fault-tracing information
    • Information
      • Fault-tracing information
      • Verification
• ECM-2400: Fuel Pump (FP) Relay. Signal Too High. Intermittent Fault (B5234T3; 1999-2002)
  • Diagnostic trouble code (DTC) information
  • Signal too high. Intermittent fault
    • Checking component and wiring
    • Information
      • Fault-tracing information
• ECM-2400: Fuel Pump (FP) Relay. Signal Too High. Intermittent Fault (B5244T; 2000-2002)
  • Diagnostic trouble code (DTC) information
  • Signal too high. Intermittent fault
• ECM-2400: Fuel Pump (FP) Relay. Signal Too High. Intermittent Fault (B5254T; 1999)
  • Diagnostic trouble code (DTC) information
  • Signal too high. Intermittent fault
• ECM-2400: Fuel Pump (FP) Relay. Signal Too High. Permanent Fault (B5234T3; 1999-2002)
  • Diagnostic trouble code (DTC) information
  • Signal too high. Permanent fault
    • Checking component and wiring
    • Verification
      • Verification
    • Information
      • Fault-tracing information
• ECM-2400: Fuel Pump (FP) Relay. Signal Too High. Permanent Fault (B5244T; 2000-2002)
  • Diagnostic trouble code (DTC) information
  • Signal too high. Permanent fault
• ECM-2400: Fuel Pump (FP) Relay. Signal Too High. Permanent Fault (B5254T; 1999)
  • Diagnostic trouble code (DTC) information
  • Signal too high. Permanent fault
• ECM-2400: Fuel Pump (FP) Relay. Signal Too Low (B5234T9; B5244T7; 2003-2004)
  • Diagnostic trouble code (DTC) information ECM-2400
  • Signal too low
    • Checking components and wiring
    • Verification
      • Verification
    • Information
      • Fault-tracing information
• ECM-2400: Fuel Pump (FP) Relay. Signal Too Low (B5244S; 2000)
  • Diagnostic trouble code (DTC) information
  • Signal too low
    • Checking for intermittent faults
    • Checking the connector
    • Checking the wiring
    • Intermittent fault
      • Notes
      • Verification
    • Information
      • Fault-tracing information
• ECM-2400: Fuel Pump (FP) Relay. Signal Too Low. Intermittent Fault (B5234T3; 1999-2002)
  • Diagnostic trouble code (DTC) information
  • Signal too low. Intermittent fault
    • Checking component and wiring
    • Information
      • Fault-tracing information
• ECM-2400: Fuel Pump (FP) Relay. Signal Too Low. Intermittent Fault (B5244T; 2000-2002)
  • Diagnostic trouble code (DTC) information
  • Signal too low. Intermittent fault
• ECM-2400: Fuel Pump (FP) Relay. Signal Too Low. Intermittent Fault (B5254T; 1999)
  • Diagnostic trouble code (DTC) information
  • Signal too low. Intermittent fault
• ECM-2400: Fuel Pump (FP) Relay. Signal Too Low. Permanent Fault (B5234T3; 1999-2002)
  • Diagnostic trouble code (DTC) information
  • Signal too low. Permanent fault
    • Checking component and wiring
    • Verification
      • Verification
    • Information
      • Fault-tracing information
• ECM-2400: Fuel Pump (FP) Relay. Signal Too Low. Permanent Fault (B5244T; 2000-2002)
  • Diagnostic trouble code (DTC) information
  • Signal too low. Permanent fault
• ECM-2400: Fuel Pump (FP) Relay. Signal Too Low. Permanent Fault (B5254T; 1999)
  • Diagnostic trouble code (DTC) information
  • Signal too low. Permanent fault
• ECM-250A: Long-Term Fuel Trim. Lower Limit (B5244S; 2000)
  • Diagnostic trouble code (DTC) information ECM-250A
  • Lower limit
    • Checking fuel injection system
    • Incorrect adaptation range
    • Reset adaptations
    • Start adaptations
    • Information
      • Fault-tracing information
• ECM-250A: Long-Term Fuel Trim. Upper Limit (B5244S; 2000)
  • Diagnostic trouble code (DTC) information ECM-250A
  • Upper limit
    • Checking fuel injection system
    • Incorrect adaptation range
    • Reset adaptations
    • Start adaptations
    • Information
      • Fault-tracing information
• ECM-260A: Long-Term Fuel Trim. Lower Limit (B5234T3; 1999-2002)
  • Diagnostic trouble code (DTC) information
  • Lower limit
    • Checking fuel injection system
    • Checking mass air flow (MAF) sensor
      • Notes
      • Verification
    • Information
      • Fault-tracing information
• ECM-260A: Long-Term Fuel Trim. Lower Limit (B5234T9; B5244T7; 2003-2004)
  • Diagnostic trouble code (DTC) information
  • Lower limit
• ECM-260A: Long-Term Fuel Trim. Lower Limit (B5244T; 2000-2002)
  • Diagnostic trouble code (DTC) information
  • Lower limit
• ECM-260A: Long-Term Fuel Trim. Lower Limit (B5254T; 1999)
  • Diagnostic trouble code (DTC) information
  • Lower limit
• ECM-260A: Long-Term Fuel Trim. Upper Limit (B5234T3; 1999-2002)
  • Diagnostic trouble code (DTC) information
  • Upper limit
    • Checking the fuel injection system
    • Checking fuel pressure and residual pressure in the workshop
      • Choosing a method for taking a reading
      • Measuring line pressure
      • Checking residual pressure
      • Verification
    • Information
      • Fault-tracing information
• ECM-260A: Long-Term Fuel Trim. Upper Limit (B5234T9; B5244T7; 2003-2004)
  • Diagnostic trouble code (DTC) information
  • Upper limit
• ECM-260A: Long-Term Fuel Trim. Upper Limit (B5244T; 2000-2002)
  • Diagnostic trouble code (DTC) information
  • Upper limit
• ECM-260A: Long-Term Fuel Trim. Upper Limit (B5254T; 1999)
  • Diagnostic trouble code (DTC) information
  • Upper limit
• ECM-261A: Long-Term Fuel Trim. Lower Limit (B5234T3; 1999-2002)
  • Diagnostic trouble code (DTC) information
  • Lower limit
    • Checking fuel injection system
    • Checking mass air flow (MAF) sensor
      • Notes
      • Verification
    • Information
      • Fault-tracing information
• ECM-261A: Long-Term Fuel Trim. Lower Limit (B5234T9; B5244T7; 2003-2004)
  • Diagnostic trouble code (DTC) information
  • Lower limit
• ECM-261A: Long-Term Fuel Trim. Lower Limit (B5244T; 2000-2002)
  • Diagnostic trouble code (DTC) information
  • Lower limit
• ECM-261A: Long-Term Fuel Trim. Lower Limit (B5254T; 1999)
  • Diagnostic trouble code (DTC) information
  • Lower limit
• ECM-261A: Long-Term Fuel Trim. Upper Limit (B5234T3; 1999-2002)
  • Diagnostic trouble code (DTC) information
  • Upper limit
    • Checking for air leakage in the intake system
    • Checking the fuel injection system
    • Checking fuel pressure and residual pressure in the workshop
      • Choosing a method for taking a reading
      • Measuring line pressure
      • Checking residual pressure
      • Verification
    • Information
      • Fault-tracing information
• ECM-261A: Long-Term Fuel Trim. Upper Limit (B5234T9; B5244T7; 2003-2004)
  • Diagnostic trouble code (DTC) information
  • Upper limit
• ECM-261A: Long-Term Fuel Trim. Upper Limit (B5244T; 2000-2002)
  • Diagnostic trouble code (DTC) information
  • Upper limit
• ECM-261A: Long-Term Fuel Trim. Upper Limit (B5254T; 1999)
  • Diagnostic trouble code (DTC) information
  • Upper limit
• ECM-262A: Long-Term Fuel Trim. Lower Limit (B5234T3; 1999-2002)
  • Diagnostic trouble code (DTC) information
  • Lower limit
    • Checking fuel injection system
    • Checking mass air flow (MAF) sensor
      • Notes
      • Verification
    • Information
      • Fault-tracing information
• ECM-262A: Long-Term Fuel Trim. Lower Limit (B5234T9; B5244T7; 2003-2004)
  • Diagnostic trouble code (DTC) information
  • Lower limit
• ECM-262A: Long-Term Fuel Trim. Lower Limit (B5244T; 2000-2002)
  • Diagnostic trouble code (DTC) information
  • Lower limit
• ECM-262A: Long-Term Fuel Trim. Lower Limit (B5254T; 1999)
  • Diagnostic trouble code (DTC) information
  • Lower limit
• ECM-262A: Long-Term Fuel Trim. Upper Limit (B5234T3; 1999-2002)
  • Diagnostic trouble code (DTC) information
  • Upper limit
    • Checking fuel injection system
      • Notes
      • Verification
    • Information
      • Fault-tracing information
• ECM-262A: Long-Term Fuel Trim. Upper Limit (B5234T9; B5244T7; 2003-2004)
  • Diagnostic trouble code (DTC) information
  • Upper limit
• ECM-262A: Long-Term Fuel Trim. Upper Limit (B5244T; 2000-2002)
  • Diagnostic trouble code (DTC) information
  • Upper limit
• ECM-262A: Long-Term Fuel Trim. Upper Limit (B5254T; 1999)
  • Diagnostic trouble code (DTC) information
  • Upper limit
• ECM-268A: Long-Term Fuel Trim. Faulty Signal (B5234T3; 1999-2002)
  • Diagnostic trouble code (DTC) information
  • Fault-tracing information
    • Information
• ECM-268A: Long-Term Fuel Trim. Faulty Signal (B5234T9; B5244T7; 2003-2004)
  • Diagnostic trouble code (DTC) information
  • Fault-tracing information
• ECM-268A: Long-Term Fuel Trim. Faulty Signal (B5244T; 2000-2002)
  • Diagnostic trouble code (DTC) information
  • Fault-tracing information
• ECM-268A: Long-Term Fuel Trim. Faulty Signal (B5254T; 1999)
  • Diagnostic trouble code (DTC) information
  • Fault-tracing information
• ECM-268A: Long-Term Fuel Trim. Lower Limit (B5234T3; 1999-2002)
  • Diagnostic trouble code (DTC) information
  • Fault-tracing information
• ECM-268A: Long-Term Fuel Trim. Lower Limit (B5234T9; B5244T7; 2003-2004)
  • Diagnostic trouble code (DTC) information
  • Fault-tracing information
• ECM-268A: Long-Term Fuel Trim. Lower Limit (B5244T; 2000-2002)
  • Diagnostic trouble code (DTC) information
  • Fault-tracing information
• ECM-268A: Long-Term Fuel Trim. Lower Limit (B5254T; 1999)
  • Diagnostic trouble code (DTC) information
  • Fault-tracing information
• ECM-268A: Long-Term Fuel Trim. Upper Limit (B5234T3; 1999-2002)
  • Diagnostic trouble code (DTC) information
  • Fault-tracing information
• ECM-268A: Long-Term Fuel Trim. Upper Limit (B5234T9; B5244T7; 2003-2004)
  • Diagnostic trouble code (DTC) information
  • Fault-tracing information
• ECM-268A: Long-Term Fuel Trim. Upper Limit (B5244T; 2000-2002)
  • Diagnostic trouble code (DTC) information
  • Fault-tracing information
• ECM-268A: Long-Term Fuel Trim. Upper Limit (B5254T; 1999)
  • Diagnostic trouble code (DTC) information
  • Fault-tracing information
• ECM-280A: Front Heated Oxygen Sensor (Ho2S), Bank 1. Faulty Signal. Intermittent Fault (B5234T9; B5244T7; 2003-2004)
  • Diagnostic trouble code (DTC) information
  • Faulty signal. Intermittent fault
    • Checking connectors and wiring
    • Information
      • Fault-tracing information
• ECM-280A: Front Heated Oxygen Sensor (Ho2S), Bank 1. Faulty Signal. Permanent Fault (B5234T9; B5244T7; 2003-2004)
  • Diagnostic trouble code (DTC) information
  • Faulty signal. Permanent fault
    • Checking connector, wiring and components
      • Notes
      • Verification
    • Information
      • Fault-tracing information
• ECM-280A: Front Heated Oxygen Sensor (Ho2S), Bank 1. Signal Missing. Intermittent Fault (B5234T9; B5244T7; 2003-2004)
  • Diagnostic trouble code (DTC) information
  • Signal missing. Intermittent fault
    • Checking the wiring
    • Information
      • Fault-tracing information
• ECM-280A: Front Heated Oxygen Sensor (Ho2S), Bank 1. Signal Missing. Permanent Fault (B5234T9; B5244T7; 2003-2004)
  • Diagnostic trouble code (DTC) information
  • Signal missing. Permanent fault
    • Checking components and wiring
      • Notes
      • Verification
    • Information
      • Fault-tracing information
• ECM-280A: Front Heated Oxygen Sensor (Ho2S), Bank 1. Signal Too High. Intermittent Fault (B5234T9; B5244T7; 2003-2004)
  • Diagnostic trouble code (DTC) information
  • Signal too high
    • Checking for air leakage in the exhaust system
    • Checking components and wiring
      • Overview
      • Notes
      • Verification
    • Verification
    • Information
      • Fault-tracing information
• ECM-280A: Front Heated Oxygen Sensor (Ho2S), Bank 1. Signal Too High. Permanent Fault (B5234T9; B5244T7; 2003-2004)
  • Diagnostic trouble code (DTC) information
  • Signal too high
• ECM-280A: Front Heated Oxygen Sensor (Ho2S), Bank 1. Signal Too Low. Intermittent Fault (B5234T9; B5244T7; 2003-2004)
  • Diagnostic trouble code (DTC) information
  • Signal too low. Intermittent fault
    • Checking connectors and wiring
    • Information
      • Fault-tracing information
• ECM-280A: Front Heated Oxygen Sensor (Ho2S), Bank 1. Signal Too Low. Permanent Fault (B5234T9; B5244T7; 2003-2004)
  • Diagnostic trouble code (DTC) information
  • Signal too low. Permanent fault
    • Checking connector, wiring and components
      • Notes
      • Verification
    • Information
      • Fault-tracing information
• ECM-280A: Front Heated Oxygen Sensor (Ho2S), Faulty Signal. Signal Missing. Intermittent Fault (B5234T3; 1999-2002)
  • Diagnostic trouble code (DTC) information
  • Signal missing. Intermittent fault
    • Checking cables
    • Information
      • Fault-tracing information
• ECM-280A: Front Heated Oxygen Sensor (Ho2S), Faulty Signal. Signal Missing. Intermittent Fault (B5244T; 2000-2002)
  • Diagnostic trouble code (DTC) information
  • Signal missing. Intermittent fault
• ECM-280A: Front Heated Oxygen Sensor (Ho2S), Faulty Signal. Signal Missing. Intermittent Fault (B5254T; 1999)
  • Diagnostic trouble code (DTC) information
  • Signal missing. Intermittent fault
• ECM-280A: Front Heated Oxygen Sensor (Ho2S), Faulty Signal. Signal Missing. Permanent Fault (B5234T3; 1999-2002)
  • Diagnostic trouble code (DTC) information
  • Signal missing. Permanent fault
    • Checking components and wiring
      • Notes
      • Verification
    • Information
      • Fault-tracing information
• ECM-280A: Front Heated Oxygen Sensor (Ho2S), Faulty Signal. Signal Missing. Permanent Fault (B5244T; 2000-2002)
  • Diagnostic trouble code (DTC) information
  • Signal missing. Permanent fault
• ECM-280A: Front Heated Oxygen Sensor (Ho2S), Faulty Signal. Signal Missing. Permanent Fault (B5254T; 1999)
  • Diagnostic trouble code (DTC) information
  • Signal missing. Permanent fault
• ECM-280A: Front Heated Oxygen Sensor (Ho2S), Faulty Signal. Signal Too High. Intermittent Fault (B5234T3; 1999-2002)
  • Diagnostic trouble code (DTC) information
  • Signal too high
    • Checking for air leakage in the exhaust system
    • Checking components and wiring
      • Overview
      • Notes
      • Verification
    • Verification
    • Information
      • Fault-tracing information
• ECM-280A: Front Heated Oxygen Sensor (Ho2S), Faulty Signal. Signal Too High. Intermittent Fault (B5244T; 2000-2002)
  • Diagnostic trouble code (DTC) information
  • Signal too high
• ECM-280A: Front Heated Oxygen Sensor (Ho2S), Faulty Signal. Signal Too High. Intermittent Fault (B5254T; 1999)
  • Diagnostic trouble code (DTC) information
  • Signal too high
• ECM-280A: Front Heated Oxygen Sensor (Ho2S), Faulty Signal. Signal Too High. Permanent Fault (B5234T3; 1999-2002)
  • Diagnostic trouble code (DTC) information
  • Signal too high
• ECM-280A: Front Heated Oxygen Sensor (Ho2S), Faulty Signal. Signal Too High. Permanent Fault (B5244T; 2000-2002)
  • Diagnostic trouble code (DTC) information
  • Signal too high
• ECM-280A: Front Heated Oxygen Sensor (Ho2S), Faulty Signal. Signal Too High. Permanent Fault (B5254T; 1999)
  • Diagnostic trouble code (DTC) information
  • Signal too high
• ECM-280A: Front Heated Oxygen Sensor (Ho2S), Faulty Signal. Signal Too Low. Intermittent Fault (B5234T3; 1999-2002)
  • Diagnostic trouble code (DTC) information
  • Signal too low. Intermittent fault
    • Checking connector and wiring
    • Information
      • Fault-tracing information
• ECM-280A: Front Heated Oxygen Sensor (Ho2S), Faulty Signal. Signal Too Low. Intermittent Fault (B5244T; 2000-2002)
  • Diagnostic trouble code (DTC) information
  • Signal too low. Intermittent fault
• ECM-280A: Front Heated Oxygen Sensor (Ho2S), Faulty Signal. Signal Too Low. Intermittent Fault (B5254T; 1999)
  • Diagnostic trouble code (DTC) information
  • Signal too low. Intermittent fault
• ECM-280A: Front Heated Oxygen Sensor (Ho2S), Faulty Signal. Signal Too Low. Permanent Fault (B5234T3; 1999-2002)
  • Diagnostic trouble code (DTC) information
  • Signal too low. Permanent fault
    • Checking connector, wiring and components
      • Notes
      • Verification
    • Information
      • Fault-tracing information
• ECM-280A: Front Heated Oxygen Sensor (Ho2S), Faulty Signal. Signal Too Low. Permanent Fault (B5244T; 2000-2002)
  • Diagnostic trouble code (DTC) information
  • Signal too low. Permanent fault
• ECM-280A: Front Heated Oxygen Sensor (Ho2S), Faulty Signal. Signal Too Low. Permanent Fault (B5254T; 1999)
  • Diagnostic trouble code (DTC) information
  • Signal too low. Permanent fault
• ECM-280A: Front Heated Oxygen Sensor (Ho2S). Faulty Signal. Intermittent Fault (B5234T3; 1999-2002)
  • Diagnostic trouble code (DTC) information
  • Faulty signal. Intermittent fault
    • Checking connector and wiring
    • Information
      • Fault-tracing information
• ECM-280A: Front Heated Oxygen Sensor (Ho2S). Faulty Signal. Intermittent Fault (B5244T; 2000-2002)
  • Diagnostic trouble code (DTC) information
  • Faulty signal. Intermittent fault
• ECM-280A: Front Heated Oxygen Sensor (Ho2S). Faulty Signal. Intermittent Fault (B5254T; 1999)
  • Diagnostic trouble code (DTC) information
  • Faulty signal. Intermittent fault
• ECM-280A: Front Heated Oxygen Sensor (Ho2S). Faulty Signal. Permanent Fault (B5234T3; 1999-2002)
  • Diagnostic trouble code (DTC) information
  • Faulty signal. Permanent fault
    • Checking connector, wiring and components
      • Notes
      • Verification
    • Information
      • Fault-tracing information
• ECM-280A: Front Heated Oxygen Sensor (Ho2S). Faulty Signal. Permanent Fault (B5244T; 2000-2002)
  • Diagnostic trouble code (DTC) information
  • Faulty signal. Permanent fault
• ECM-280A: Front Heated Oxygen Sensor (Ho2S). Faulty Signal. Permanent Fault (B5254T; 1999)
  • Diagnostic trouble code (DTC) information
  • Faulty signal. Permanent fault
• ECM-2810: Front Heated Oxygen Sensor (Ho2S), Bank 1 Heating. Faulty Signal. Intermittent Fault (B5234T9; B5244T7; 2003-2004)
  • Diagnostic trouble code (DTC) information
  • Faulty signal. Intermittent fault
    • Fault-tracing information
    • Information
      • Fault-tracing information
• ECM-2810: Front Heated Oxygen Sensor (Ho2S), Bank 1 Heating. Faulty Signal. Permanent Fault (B5234T9; B5244T7; 2003-2004)
  • Diagnostic trouble code (DTC) information
  • Faulty signal. Permanent fault
    • Replacing the heated oxygen sensor
    • Information
      • Fault-tracing information
• ECM-2810: Front Heated Oxygen Sensor (Ho2S), Bank 1 Heating. Signal Missing. Intermittent Fault (B5234T9; B5244T7; 2003-2004)
  • Diagnostic trouble code (DTC) information
  • Signal missing. Intermittent fault
    • Checking wiring and connectors
    • Information
      • Fault-tracing information
• ECM-2810: Front Heated Oxygen Sensor (Ho2S), Bank 1 Heating. Signal Missing. Permanent Fault (B5234T9; B5244T7; 2003-2004)
  • Diagnostic trouble code (DTC) information
  • Signal missing. Permanent fault
    • Checking the connector
    • Checking components and wiring
      • Notes
      • Verification
    • Information
      • Fault-tracing information
• ECM-2810: Front Heated Oxygen Sensor (Ho2S), Bank 1 Heating. Signal Too High. Intermittent Fault (B5234T9; B5244T7; 2003-2004)
  • Diagnostic trouble code (DTC) information
  • Signal too high. Intermittent fault
    • Checking the wiring
    • Information
      • Fault-tracing information
• ECM-2810: Front Heated Oxygen Sensor (Ho2S), Bank 1 Heating. Signal Too High. Permanent Fault (B5234T9; B5244T7; 2003-2004)
  • Diagnostic trouble code (DTC) information
  • Signal too high. Permanent fault
    • Checking components and wiring
      • Notes
      • Verification
    • Information
      • Fault-tracing information
• ECM-2810: Front Heated Oxygen Sensor (Ho2S), Bank 1 Heating. Signal Too Low. Intermittent Fault (B5234T9; B5244T7; 2003-2004)
  • Diagnostic trouble code (DTC) information
  • Signal too low. Intermittent fault
    • Checking the wiring
    • Information
      • Fault-tracing information
• ECM-2810: Front Heated Oxygen Sensor (Ho2S), Bank 1 Heating. Signal Too Low. Permanent Fault (B5234T9; B5244T7; 2003-2004)
  • Diagnostic trouble code (DTC) information
  • Signal too low. Permanent fault
    • Checking components and wiring
      • Notes
      • Verification
    • Information
      • Fault-tracing information
• ECM-2810: Front Heated Oxygen Sensor (Ho2S), Preheating Faulty Signal. Intermittent Fault (B5234T3; 1999-2002)
  • Diagnostic trouble code (DTC) information
  • Faulty signal. Intermittent fault
    • Fault-tracing information
    • Information
      • Fault-tracing information
• ECM-2810: Front Heated Oxygen Sensor (Ho2S), Preheating Faulty Signal. Intermittent Fault (B5244T; 2000-2002)
  • Diagnostic trouble code (DTC) information
  • Faulty signal. Intermittent fault
• ECM-2810: Front Heated Oxygen Sensor (Ho2S), Preheating Faulty Signal. Intermittent Fault (B5254T; 1999)
  • Diagnostic trouble code (DTC) information
  • Faulty signal. Intermittent fault
• ECM-2810: Front Heated Oxygen Sensor (Ho2S), Preheating Faulty Signal. Permanent Fault (B5234T3; 1999-2002)
  • Diagnostic trouble code (DTC) information
  • Faulty signal. Permanent fault
    • Replacing heated oxygen sensor
    • Information
      • Fault-tracing information
• ECM-2810: Front Heated Oxygen Sensor (Ho2S), Preheating Faulty Signal. Permanent Fault (B5244T; 2000-2002)
  • Diagnostic trouble code (DTC) information
  • Faulty signal. Permanent fault
• ECM-2810: Front Heated Oxygen Sensor (Ho2S), Preheating Faulty Signal. Permanent Fault (B5254T; 1999)
  • Diagnostic trouble code (DTC) information
  • Faulty signal. Permanent fault
• ECM-2810: Front Heated Oxygen Sensor (Ho2S), Preheating Signal Missing. Intermittent Fault (B5234T3; 1999-2002)
  • Diagnostic trouble code (DTC) information
  • Signal missing. Intermittent fault
    • Checking cables and connectors
    • Information
      • Fault-tracing information
• ECM-2810: Front Heated Oxygen Sensor (Ho2S), Preheating Signal Missing. Intermittent Fault (B5244T; 2000-2002)
  • Diagnostic trouble code (DTC) information
  • Signal missing. Intermittent fault
• ECM-2810: Front Heated Oxygen Sensor (Ho2S), Preheating Signal Missing. Intermittent Fault (B5254T; 1999)
  • Diagnostic trouble code (DTC) information
  • Signal missing. Intermittent fault
• ECM-2810: Front Heated Oxygen Sensor (Ho2S), Preheating Signal Missing. Permanent Fault (B5234T3; 1999-2002)
  • Diagnostic trouble code (DTC) information
  • Signal missing. Permanent fault
    • Checking connector
    • Checking wiring and components
      • Notes
      • Verification
    • Information
      • Fault-tracing information
• ECM-2810: Front Heated Oxygen Sensor (Ho2S), Preheating Signal Missing. Permanent Fault (B5244T; 2000-2002)
  • Diagnostic trouble code (DTC) information
  • Signal missing. Permanent fault
• ECM-2810: Front Heated Oxygen Sensor (Ho2S), Preheating Signal Missing. Permanent Fault (B5254T; 1999)
  • Diagnostic trouble code (DTC) information
  • Signal missing. Permanent fault
• ECM-2810: Front Heated Oxygen Sensor (Ho2S), Preheating Signal Too High. Intermittent Fault (B5234T3; 1999-2002)
  • Diagnostic trouble code (DTC) information
  • Signal too high. Intermittent fault
    • Checking cables
    • Information
      • Fault-tracing information
• ECM-2810: Front Heated Oxygen Sensor (Ho2S), Preheating Signal Too High. Intermittent Fault (B5244T; 2000-2002)
  • Diagnostic trouble code (DTC) information
  • Signal too high. Intermittent fault
• ECM-2810: Front Heated Oxygen Sensor (Ho2S), Preheating Signal Too High. Intermittent Fault (B5254T; 1999)
  • Diagnostic trouble code (DTC) information
  • Signal too high. Intermittent fault
• ECM-2810: Front Heated Oxygen Sensor (Ho2S), Preheating Signal Too High. Permanent Fault (B5234T3; 1999-2002)
  • Diagnostic trouble code (DTC) information
  • Signal too high. Permanent fault
    • Checking wiring and components
      • Notes
      • Verification
    • Information
      • Fault-tracing information
• ECM-2810: Front Heated Oxygen Sensor (Ho2S), Preheating Signal Too High. Permanent Fault (B5244T; 2000-2002)
  • Diagnostic trouble code (DTC) information
  • Signal too high. Permanent fault
• ECM-2810: Front Heated Oxygen Sensor (Ho2S), Preheating Signal Too High. Permanent Fault (B5254T; 1999)
  • Diagnostic trouble code (DTC) information
  • Signal too high. Permanent fault
• ECM-2810: Front Heated Oxygen Sensor (Ho2S), Preheating Signal Too Low. Intermittent Fault (B5234T3; 1999-2002)
  • Diagnostic trouble code (DTC) information
  • Signal too low. Intermittent fault
    • Checking cables
    • Information
      • Fault-tracing information
• ECM-2810: Front Heated Oxygen Sensor (Ho2S), Preheating Signal Too Low. Intermittent Fault (B5244T; 2000-2002)
  • Diagnostic trouble code (DTC) information
  • Signal too low. Intermittent fault
• ECM-2810: Front Heated Oxygen Sensor (Ho2S), Preheating Signal Too Low. Intermittent Fault (B5254T; 1999)
  • Diagnostic trouble code (DTC) information
  • Signal too low. Intermittent fault
• ECM-2810: Front Heated Oxygen Sensor (Ho2S), Preheating Signal Too Low. Permanent Fault (B5234T3; 1999-2002)
  • Diagnostic trouble code (DTC) information
  • Signal too low. Permanent fault
    • Checking wiring and components
      • Notes
      • Verification
    • Information
      • Fault-tracing information
• ECM-2810: Front Heated Oxygen Sensor (Ho2S), Preheating Signal Too Low. Permanent Fault (B5244T; 2000-2002)
  • Diagnostic trouble code (DTC) information
  • Signal too low. Permanent fault
• ECM-2810: Front Heated Oxygen Sensor (Ho2S), Preheating Signal Too Low. Permanent Fault (B5254T; 1999)
  • Diagnostic trouble code (DTC) information
  • Signal too low. Permanent fault
• ECM-2A0A: Rear Heated Oxygen Sensor (Ho2S). Faulty Signal. Intermittent Fault (B5234T3; 1999-2002)
  • Diagnostic trouble code (DTC) information
  • Faulty signal. Intermittent fault
    • Checking cables
    • Information
      • Fault-tracing information
• ECM-2A0A: Rear Heated Oxygen Sensor (Ho2S). Faulty Signal. Intermittent Fault (B5234T9; B5244T7; 2003-2004)
  • Diagnostic trouble code (DTC) information
  • Faulty signal. Intermittent fault
    • Checking the wiring
    • Information
      • Fault-tracing information
• ECM-2A0A: Rear Heated Oxygen Sensor (Ho2S). Faulty Signal. Intermittent Fault (B5244T; 2000-2002)
  • Diagnostic trouble code (DTC) information
  • Faulty signal. Intermittent fault
• ECM-2A0A: Rear Heated Oxygen Sensor (Ho2S). Faulty Signal. Intermittent Fault (B5254T; 1999)
  • Diagnostic trouble code (DTC) information
  • Faulty signal. Intermittent fault
• ECM-2A0A: Rear Heated Oxygen Sensor (Ho2S). Faulty Signal. Permanent Fault (B5234T3; 1999-2002)
  • Diagnostic trouble code (DTC) information
  • Faulty signal. Permanent fault
    • Checking wiring and components
      • Notes
      • Verification
    • Information
      • Fault-tracing information
• ECM-2A0A: Rear Heated Oxygen Sensor (Ho2S). Faulty Signal. Permanent Fault (B5234T9; B5244T7; 2003-2004)
  • Diagnostic trouble code (DTC) information
  • Faulty signal. Permanent fault
    • Checking components and wiring
      • Notes
      • Verification
    • Information
      • Fault-tracing information
• ECM-2A0A: Rear Heated Oxygen Sensor (Ho2S). Faulty Signal. Permanent Fault (B5244T; 2000-2002)
  • Diagnostic trouble code (DTC) information
  • Faulty signal. Permanent fault
• ECM-2A0A: Rear Heated Oxygen Sensor (Ho2S). Faulty Signal. Permanent Fault (B5254T; 1999)
  • Diagnostic trouble code (DTC) information
  • Faulty signal. Permanent fault
• ECM-2A0A: Rear Heated Oxygen Sensor (Ho2S). Signal Missing. Intermittent Fault (B5234T3; 1999-2002)
  • Diagnostic trouble code (DTC) information
  • Signal missing. Intermittent fault
    • Checking cables and connectors
    • Information
      • Fault-tracing information
• ECM-2A0A: Rear Heated Oxygen Sensor (Ho2S). Signal Missing. Intermittent Fault (B5234T9; B5244T7; 2003-2004)
  • Diagnostic trouble code (DTC) information
  • Signal missing. Intermittent fault
    • Checking wiring and connectors
    • Information
      • Fault-tracing information
• ECM-2A0A: Rear Heated Oxygen Sensor (Ho2S). Signal Missing. Intermittent Fault (B5244T; 2000-2002)
  • Diagnostic trouble code (DTC) information
  • Signal missing. Intermittent fault
• ECM-2A0A: Rear Heated Oxygen Sensor (Ho2S). Signal Missing. Intermittent Fault (B5254T; 1999)
  • Diagnostic trouble code (DTC) information
  • Signal missing. Intermittent fault
• ECM-2A0A: Rear Heated Oxygen Sensor (Ho2S). Signal Missing. Permanent Fault (B5234T3; 1999-2002)
  • Diagnostic trouble code (DTC) information
  • Signal missing. Permanent fault
    • Checking connector
    • Checking wiring and components
      • Notes
      • Verification
    • Information
      • Fault-tracing information
• ECM-2A0A: Rear Heated Oxygen Sensor (Ho2S). Signal Missing. Permanent Fault (B5234T9; B5244T7; 2003-2004)
  • Diagnostic trouble code (DTC) information
  • Signal missing. Permanent fault
    • Checking the connector
    • Checking components and wiring
      • Notes
      • Verification
    • Information
      • Fault-tracing information
• ECM-2A0A: Rear Heated Oxygen Sensor (Ho2S). Signal Missing. Permanent Fault (B5244T; 2000-2002)
  • Diagnostic trouble code (DTC) information
  • Signal missing. Permanent fault
• ECM-2A0A: Rear Heated Oxygen Sensor (Ho2S). Signal Missing. Permanent Fault (B5254T; 1999)
  • Diagnostic trouble code (DTC) information
  • Signal missing. Permanent fault
• ECM-2A0A: Rear Heated Oxygen Sensor (Ho2S). Signal Too High. Intermittent Fault (B5234T3; 1999-2002)
  • Diagnostic trouble code (DTC) information
  • Signal too high. Intermittent fault
    • Checking cables
    • Information
      • Fault-tracing information
• ECM-2A0A: Rear Heated Oxygen Sensor (Ho2S). Signal Too High. Intermittent Fault (B5234T9; B5244T7; 2003-2004)
  • Diagnostic trouble code (DTC) information
  • Signal too high. Intermittent fault
    • Checking the wiring
    • Information
      • Fault-tracing information
• ECM-2A0A: Rear Heated Oxygen Sensor (Ho2S). Signal Too High. Intermittent Fault (B5244T; 2000-2002)
  • Diagnostic trouble code (DTC) information
  • Signal too high. Intermittent fault
• ECM-2A0A: Rear Heated Oxygen Sensor (Ho2S). Signal Too High. Intermittent Fault (B5254T; 1999)
  • Diagnostic trouble code (DTC) information
  • Signal too high. Intermittent fault
• ECM-2A0A: Rear Heated Oxygen Sensor (Ho2S). Signal Too High. Permanent Fault (B5234T3; 1999-2002)
  • Diagnostic trouble code (DTC) information
  • Signal too high. Permanent fault
    • Checking wiring and components
      • Notes
      • Verification
    • Information
      • Fault-tracing information
• ECM-2A0A: Rear Heated Oxygen Sensor (Ho2S). Signal Too High. Permanent Fault (B5234T9; B5244T7; 2003-2004)
  • Diagnostic trouble code (DTC) information
  • Signal too high. Permanent fault
    • Checking components and wiring
      • Notes
      • Verification
    • Information
      • Fault-tracing information
• ECM-2A0A: Rear Heated Oxygen Sensor (Ho2S). Signal Too High. Permanent Fault (B5244T; 2000-2002)
  • Diagnostic trouble code (DTC) information
  • Signal too high. Permanent fault
• ECM-2A0A: Rear Heated Oxygen Sensor (Ho2S). Signal Too High. Permanent Fault (B5254T; 1999)
  • Diagnostic trouble code (DTC) information
  • Signal too high. Permanent fault
• ECM-2A1A: Rear Heated Oxygen Sensor (Ho2S) Aging Faulty Signal (B5234T9; B5244T7; 2003-2004)
  • Diagnostic trouble code (DTC) information
  • Permanent fault
    • Checking for air leakage in the exhaust system
    • Replacing the heated oxygen sensor
      • Notes
      • Verification
    • Information
      • Fault-tracing information
• ECM-2A1A: Rear Heated Oxygen Sensor (Ho2S) Aging Signal Missing (B5234T9; B5244T7; 2003-2004)
  • Diagnostic trouble code (DTC) information
  • Permanent fault
• ECM-2A1A: Rear Heated Oxygen Sensor (Ho2S) Aging Signal Too High (B5234T9; B5244T7; 2003-2004)
  • Diagnostic trouble code (DTC) information
  • Permanent fault
• ECM-2A1A: Rear Heated Oxygen Sensor (Ho2S) Aging Signal Too High. Intermittent Fault (B5234T3; 1999-2002)
  • Diagnostic trouble code (DTC) information
  • Signal too high. Intermittent fault
    • Fault-tracing information
    • Information
      • Fault-tracing information
• ECM-2A1A: Rear Heated Oxygen Sensor (Ho2S) Aging Signal Too High. Intermittent Fault (B5244T; 2000-2002)
  • Diagnostic trouble code (DTC) information
  • Signal too high. Intermittent fault
• ECM-2A1A: Rear Heated Oxygen Sensor (Ho2S) Aging Signal Too High. Intermittent Fault (B5254T; 1999)
  • Diagnostic trouble code (DTC) information
  • Signal too high. Intermittent fault
• ECM-2A1A: Rear Heated Oxygen Sensor (Ho2S) Aging Signal Too High. Permanent Fault (B5234T3; 1999-2002)
  • Diagnostic trouble code (DTC) information
  • Signal too high. Permanent fault
    • Checking for air leakage in the exhaust system
    • Replacing the heated oxygen sensor
      • Notes
      • Verification
    • Information
      • Fault-tracing information
• ECM-2A1A: Rear Heated Oxygen Sensor (Ho2S) Aging Signal Too High. Permanent Fault (B5244T; 2000-2002)
  • Diagnostic trouble code (DTC) information
  • Signal too high. Permanent fault
• ECM-2A1A: Rear Heated Oxygen Sensor (Ho2S) Aging Signal Too High. Permanent Fault (B5254T; 1999)
  • Diagnostic trouble code (DTC) information
  • Signal too high. Permanent fault
• ECM-2A1A: Rear Heated Oxygen Sensor (Ho2S) Aging Signal Too Low (B5234T9; B5244T7; 2003-2004)
  • Diagnostic trouble code (DTC) information
  • Permanent fault
• ECM-2A20: Heated Oxygen Sensor (Ho2S) Bank 1, Preheating. Signal Missing (B5234T9; B5244T7; 2003-2004)
  • Diagnostic trouble code (DTC) information
  • Signal missing
    • Checking the connector
    • Checking components and wiring
      • Notes
      • Verification
    • Information
      • Fault-tracing information
• ECM-2A20: Heated Oxygen Sensor (Ho2S) Bank 1, Preheating. Signal Too High (B5234T9; B5244T7; 2003-2004)
  • Diagnostic trouble code (DTC) information
  • Signal too high
    • Checking components and wiring
      • Notes
      • Verification
    • Information
      • Fault-tracing information
• ECM-2A20: Heated Oxygen Sensor (Ho2S) Bank 1, Preheating. Signal Too Low (B5234T9; B5244T7; 2003-2004)
  • Diagnostic trouble code (DTC) information
  • Signal too low
    • Checking components and wiring
      • Notes
      • Verification
    • Information
      • Fault-tracing information
• ECM-2A2A: Rear Heated Oxygen Sensor (Ho2S) Preheating. Faulty Signal (B5234T9; B5244T7; 2003-2004)
  • Diagnostic trouble code (DTC) information
  • Faulty signal
    • Checking the connector
    • Verification
      • Verification
    • Information
      • Fault-tracing information